superpat
Member
HI,
For those whom English is not their first language or anyone not familiar with the term:-
http://www.urbandictionary.com/define.php?term=borked
I was attempting to update from AC21 to AC23. It all appeared to go well until after the camera had updated, rebooted, (showed me AC23 in the rear LEDS), it then asked and formatted the card that was in the camera.. After that nada, nothing, zero, zilch,
Now when I power up the camera, the FRONT blue LED comes on for a couple of seconds then goes off. Nothing else happens even waiting forever, SD card in or out!
I have been in contact with Lukas, asking if there is a de-bricking procedure, there is apparantly a "master" sdcard which may perform a miracle, which I am waiting for.
In the meantime, has anyone de-bricked one of these devices? Is there a reset procedure?
Any pertinent advice gratefully received!
I think it is going to be an RMA job though
cheers
Patrick
For those whom English is not their first language or anyone not familiar with the term:-
http://www.urbandictionary.com/define.php?term=borked
I was attempting to update from AC21 to AC23. It all appeared to go well until after the camera had updated, rebooted, (showed me AC23 in the rear LEDS), it then asked and formatted the card that was in the camera.. After that nada, nothing, zero, zilch,
Now when I power up the camera, the FRONT blue LED comes on for a couple of seconds then goes off. Nothing else happens even waiting forever, SD card in or out!
I have been in contact with Lukas, asking if there is a de-bricking procedure, there is apparantly a "master" sdcard which may perform a miracle, which I am waiting for.
In the meantime, has anyone de-bricked one of these devices? Is there a reset procedure?
Any pertinent advice gratefully received!
I think it is going to be an RMA job though
cheers
Patrick
Last edited by a moderator: