A suggestion, could you please update the firmware in the future to solve the problem of the a229pro three camera version having only three camera options for video resolution and not being able to enable only one or two cameras. Because sometimes only one is needed, which is also to save space considerations，thanks
Viofo, let’s go! A229 Pro 3-Channel Dash Camera review (+ Vantrue Nexus 4 Pro shoot-out!)
- Thread starter Agie
- Start date
All the buttons on the camera have been endowed with functions, so there are no spare buttons to be used. To make it easier to plug/unplug, we have used a 3.5mm connector and type-c plug on the interior/rear cables. So you can simply unplug them when you just need the front one.
Thans for your reply.This is the settings interface for Vantrue n4, please refer to it。It should be easy to resolve by updating the software, without the need to improve the hardware。
OP
OP
Agie
Well-Known Member
- Joined
- Aug 19, 2016
- Messages
- 1,805
- Reaction score
- 902
- Location
- Perth, Australia
- Country
- Australia
- Dash Cam
- 70mai S500, A229 Pro, VS1, Nexus 4 Pro, S1 Pro, A119 v3v2v1
Final Conclusion for heat testing with the Viofo A239 Pro vs. Vantrue Nexus 4 Pro.
I haven't encountered any further overheating issues with either brand, even in 41 to 43 Celsius heat here in Perth. The charts here seem to back this up, as the Viofo is already operating at a lower temperature baseline than the Vantrue: https://dashcamtalk.com/forum/threa...k-front-2k-rear-1080p-cabin.49828/post-611264
Going by the data collected, and our observations, I believe that Viofo's solution of turning off the camera to avoid overheating, is a better one. This will avoid any potential damage to the internal components, and it's implementation is well thought-out.
@viofo @VIOFO-Support
I haven't encountered any further overheating issues with either brand, even in 41 to 43 Celsius heat here in Perth. The charts here seem to back this up, as the Viofo is already operating at a lower temperature baseline than the Vantrue: https://dashcamtalk.com/forum/threa...k-front-2k-rear-1080p-cabin.49828/post-611264
Going by the data collected, and our observations, I believe that Viofo's solution of turning off the camera to avoid overheating, is a better one. This will avoid any potential damage to the internal components, and it's implementation is well thought-out.
@viofo @VIOFO-Support
OP
OP
Agie
Well-Known Member
- Joined
- Aug 19, 2016
- Messages
- 1,805
- Reaction score
- 902
- Location
- Perth, Australia
- Country
- Australia
- Dash Cam
- 70mai S500, A229 Pro, VS1, Nexus 4 Pro, S1 Pro, A119 v3v2v1
Thanks @viofo and @VIOFO-Support for another firmware update for this fantastic dashcam 
viofo.com
Viofo A229 Pro Firmware Update
Changelog:
VIOFO A229 Pro Dash Cam Support
Viofo A229 Pro Firmware Update
- Release date: 2024-02-29
- Version: V1.2_240227
- File size: 63.1M
Changelog:
- Optimised: IQ and Bluetooth connection
- Fixed: missing frames when the video clip is beyond 4GB
- Fixed: wrong voice notification when entered parking mode
- Fixed: other bugs
- Added: OTA updates in the APP
- Added: option to disable the GPS in the parking mode
- Added: option to turn off HDR stamp
