Good evening,
since I didn't like my first uart port solution on the 0803 I decided to do it better.
(my soldering skills are bad )
I used the cables of a CAT5 ethernet cable. I stole GND from the Card Reader since there is not enough space for three wires
Note: I removed the HDMI connector since I don't need it. Thats were I added the console port.
Pinout:
With soldered wires:
Then I secured the soldered points:
And thats the result:
Unfortunately I ****ed up the front case with my first solution:
So if someone has a spare front I'd love you for donating it to me
since I didn't like my first uart port solution on the 0803 I decided to do it better.
(my soldering skills are bad )
I used the cables of a CAT5 ethernet cable. I stole GND from the Card Reader since there is not enough space for three wires
Note: I removed the HDMI connector since I don't need it. Thats were I added the console port.
Pinout:
With soldered wires:
Then I secured the soldered points:
And thats the result:
Unfortunately I ****ed up the front case with my first solution:
So if someone has a spare front I'd love you for donating it to me
Last edited: