A118C issue , again

aps

Member
Joined
Jul 9, 2015
Messages
45
Reaction score
9
Country
United Kingdom
Hi , around a month ago i had an issue with the sd card in the unit , it was showing recording but when viewed files later on most are corrupt and will not view .
After updating the firmware with success i tried again , with a new sd card as it appeared that the old card have become corrupt !
So .. this was around the 8th August , after just removing the card today to view the files ... hey presto .... no good files from 9th Aug , all since are corrupt !
SO .... i suspect the camera is to blame , or a 2nd corrupt card which after testing is unlikely , maybe the firmware ? i tried to revert back to old version , but then the cam will not boot up at all .
Back to latest firmware then .

Got so disgruntled that ive gone and purchased an A119 !
But in the mean time , any ideas on the possible issue ??

thanks in advance
 
sandisk is usually the brand that gives problems in a dashcam, not transcend. i have a 32gb transcend card that i have no idea how old it is, and it works fine.

did you test the cards in h2testw before using them, and after, to see if the cards really have gone bad or if it's just corrupt files?

could it be something as simple as dirty SD card contacts in the camera? that can certainly cause file corruption even on a brand new card!
 
Thanks for the reply , yes after reading about cards etc i was aware the transend were more suited for the cam , i haven't cleaned the card as not 100% convinced it would cause a corrupt file ?
I have run it with a 32gb previously and dont recall image/file issues there but i could be wrong .
 
sandisk is usually the brand that gives problems in a dashcam, not transcend. i have a 32gb transcend card that i have no idea how old it is, and it works fine.

did you test the cards in h2testw before using them, and after, to see if the cards really have gone bad or if it's just corrupt files?

could it be something as simple as dirty SD card contacts in the camera? that can certainly cause file corruption even on a brand new card!
will try the card scan for errors
 
How is it formatted?
In camera?
Fat? Ex-fat?

Some formats give issues on larger than 32gb cards.
 
A lot of dashcams don't work too well with cards larger than 32GB.
 
Fat32 formatted plus the a118 has been ok'd with certain 64gb's .
But im not excluding the fact that i have a rogue that simply dosnt like 64's ... But why start ok then fail a few days later :/
 
Cards from reputable dealer in UK , as stated one has been sent back as totally failed , the other ok.
 
A lot of dashcams don't work too well with cards larger than 32GB.
A118c does work with certain 64's as ive read on here. Had a good old search around here for details before i used the 64.
regards
 
A118c does work with certain 64's as ive read on here. Had a good old search around here for details before i used the 64.
regards

Most of the firmwares, especially on low-mid-spec cams have been written with a maximum of 32GB in mind (FAT32). Larger cards might work - at least for a short while - but that doesn't mean the cam was designed for it.

Some 64s work in some cams but 64s are far more likely to cause unexplained misbehaviour in a cam, or the card itself suffer sudden unexplained failure.
And just because someone found that a 64GB card worked initially, doesn't mean that it worked later or lasted for long, especially once overwrites fragment the data.

The market is flooded with fake cards too - only the most reputable sellers can be trusted and even they occasionally somehow end up with some fakes.

32GB is the sweet spot between price, expendability, maximum capacity and trouble-free performance. 16GB is too small for many people (about two hours recording). 64GB just don't seem to be consistently reliable in dashcams.

Based on my own card failure rates, I'd make a guess that micro sd cards in the 16GB to 32GB size range, have about a 5-10% chance of failure in any given month when used in a dashcam.

So I suggest try a genuine good quality class 10 card of 16GB or 32GB. I find the Transcend 32GB cards to be trouble-free in a wide range of cams.
 
Most of the firmwares, especially on low-mid-spec cams have been written with a maximum of 32GB in mind (FAT32). Larger cards might work - at least for a short while - but that doesn't mean the cam was designed for it.

Some 64s work in some cams but 64s are far more likely to cause unexplained misbehaviour in a cam, or the card itself suffer sudden unexplained failure.
And just because someone found that a 64GB card worked initially, doesn't mean that it worked later or lasted for long, especially once overwrites fragment the data.

The market is flooded with fake cards too - only the most reputable sellers can be trusted and even they occasionally somehow end up with some fakes.

32GB is the sweet spot between price, expendability, maximum capacity and trouble-free performance. 16GB is too small for many people (about two hours recording). 64GB just don't seem to be consistently reliable in dashcams.

Based on my own card failure rates, I'd make a guess that micro sd cards in the 16GB to 32GB size range, have about a 5-10% chance of failure in any given month when used in a dashcam.

So I suggest try a genuine good quality class 10 card of 16GB or 32GB. I find the Transcend 32GB cards to be trouble-free in a wide range of cams.
Thanks , sound advice !
I suspect ill be going back on the 32gb , will be tested fully before either selling on or put in rear window.
A119 arrives today so i know that is spec'd to receive 64's .
Always use reputable dealers when comes to memory cards , i need to have 100% reliability in cards for my dslr's

Regards
 
.....A119 arrives today so i know that is spec'd to receive 64's .....

One thing I've learned about dashcams in recent years is that what they claim to be able to do doesn't always correlate with what they actually do. 😉 😀
 
Back
Top