Camera Starts up and then shuts down shortly after, with beeps

[eff]

I have connected the B1m to the ACC ports of my Husqvarna. When I switch on the Ignition the camera starts up with three short beeps, the red light solid. Then both camera lights become green, the GPS (L3) and the last light (L5) remain dark. A few seconds after the unit switches itself off with the same three short beeps.
The camera works normal (except the GPS) when I connect it to a Powerbank. What seems to be the problem here?

Pinging @estore009

 

[estore009]

A few seconds after the unit switches itself off with the same three short beeps.

Looks like its ACC wire disconnected. Check its Yellow wire connection then!

 

[eff]

It was indeed an incorrect wiring. Apparently I cannot completely connect the module to the Ignition controlled ACC, one phase has to go to the battery (ACC1).

 

[eff]

Thanks @estore009