Hillbilly
Well-Known Member
- Joined
- Feb 14, 2013
- Messages
- 1,755
- Reaction score
- 256
- Location
- Sunshine Coast
- Country
- Australia
- Dash Cam
- DR750s x2 DR450 x2
My 400 stopped telling me it was shutting down and corrupted the last file it recorded. Problem was the battery had died.
It still showed 3.4 volts but wasn't supplying any power to camera
I bought two of these https://www.ebay.com.au/itm/350675382948
Had to cut and resolder the wires and fit a thicker piece of doublesided tape to fit the battery as its a bit bigger than the original.
Put it altogether and turned it on in car and left it for an hour in parking mode and all is fine.
Also removed lens and cleaned both ends so is a bit clearer now as well.
It still showed 3.4 volts but wasn't supplying any power to camera
I bought two of these https://www.ebay.com.au/itm/350675382948
Had to cut and resolder the wires and fit a thicker piece of doublesided tape to fit the battery as its a bit bigger than the original.
Put it altogether and turned it on in car and left it for an hour in parking mode and all is fine.
Also removed lens and cleaned both ends so is a bit clearer now as well.