Mini 0801 with Internal Memory and GPS.
The firmware was 20131026 and the sd card (as provided by E-Prance) is a Class 10 Samsung 32Gb.
Exhibited the usual problems - Storage i/o error and Low Speed Card Error.
Further investigation revealed only 23.6Gb of external stroage had been used and the camera would not record any more clips.
After a few emails to E-Prance I was sent the following firmware:
20130922-NO1-SPIF-2710-2CARD-GPS
I formatted the Samsung Class 10 32Gb card provided by E-Prance and installed the firmware.
I ran this firmware from USB connected to PC , switching on and off, recording video and audio and it looped through the SD Card twice. Windows Explorer showed a more or less constant 29.0Gb of Used Space and 623Mb of Free Space. Fixed I thought!!
The disappointment came when I fitted it in the car. As soon as the card became full the camera switched off.
One other thing I noticed. With the original 20131026 firmware the screen went blank during recording, however, with the updated firmware 20130922 the screen remained live.
Where to now I ask myself.
The firmware was 20131026 and the sd card (as provided by E-Prance) is a Class 10 Samsung 32Gb.
Exhibited the usual problems - Storage i/o error and Low Speed Card Error.
Further investigation revealed only 23.6Gb of external stroage had been used and the camera would not record any more clips.
After a few emails to E-Prance I was sent the following firmware:
20130922-NO1-SPIF-2710-2CARD-GPS
I formatted the Samsung Class 10 32Gb card provided by E-Prance and installed the firmware.
I ran this firmware from USB connected to PC , switching on and off, recording video and audio and it looped through the SD Card twice. Windows Explorer showed a more or less constant 29.0Gb of Used Space and 623Mb of Free Space. Fixed I thought!!
The disappointment came when I fitted it in the car. As soon as the card became full the camera switched off.
One other thing I noticed. With the original 20131026 firmware the screen went blank during recording, however, with the updated firmware 20130922 the screen remained live.
Where to now I ask myself.
