F800 Pro questions

Chief

New Member
Joined
Jan 4, 2017
Messages
13
Reaction score
5
Country
United Kingdom
Thinking of purchasing the F800 Pro for my new car just have a few questions.

Do you have to have a secondary power supply going to the dash cam for the parking mode to work?
What is the recommended hard wire kit?
 
HWKit has 3 wires. Ground, 12+ Temp (contact on), 12+ Perm (contact on/off doesn't matter).
Lighter socket cable only has the Ground and 12+ Temp (contact on).

It is obvious what each is good for.
 
Only one hardwire kit available from Thinkware called the Thinkware hardwire kit.

3 wires that go to a ground bolt, ACC fuse and constant fuse.

This is the only way the Thinkware can enter parking mode with voltage cutoff ability.

Alternatively, get a dash cam battery pack.
 
Thank you both for the info.

One follow up question. Is there a recommended power bank for the F800 Pro, one that will still allow parking mode to be used? My car thinks there is a parasitic drain on its battery.
 
Like jokiin says, the Cellink Neo is an excellent option for Thinkware products.

Just ensure you select the spliced output cable as the connection between the dash cam and battery requires this set of cables to allow the dash cam to enter parking-mode recording.

Alternatively, if you have the hardwire kit already, buy the unspliced 3 wire output cable for the Neo and splice the two sets of cables together yourself.
 
Back
Top