FW20141031 Where do I find it?

[bcbob]

My Cam came with FW20140918 and am ready to upgrade to hopefully correct audio problem and my Cam does not roll over. It stops recording and goes on standby when card is full. I use a 8G cl 10 card and do not wish to have longer videos. Cannot find FW20141031 or should I go for 20140919?? I can live with audio but I really need to roll over.

 

[jokiin]

What recycle option have you set in the menu and have you tried another card at all?

 

[bcbob]

I have it set on 1 min. Have not tried another card. will have to get one. Woould like to try new FW to correcct the audio also so do what FW would you recommend

 

[jokiin]

try 3 minute and see how it goes with that card, might still need to try another card though

 

[bcbob]

try 3 minute and see how it goes with that card, might still need to try another card though

Thanks so much. Will try different time and will get another card soon. Really like the cam, excellent pics. AND, you and this forum are so much help. Thanks again

 

[CheckYourLights]

Woould like to try new FW to correcct the audio also so do what FW would you recommend

I have 20140919 on mine now. I have not seen FW20141031
If you do find a FW20141031 make sure it is for an 0803 and not an 0805 or you will break your camera.

 

[bcbob]

Thanks 'Check', That 1031 is probably for 0806 so I did 0919 and it took care of the audio and the looping (cam in the house watching us have dinner) and now I will take it for a drive tomorrow for a full test. Thank you and Jokiin for the prompt responses.

 

[CheckYourLights]

Thanks 'Check', That 1031 is probably for 0806

You are welcome.
Where did you find this 10.31?
I personally would not flash any 0803 firmware unless i find it here
http://dc.p-mc.eu/0803/firmware minus a few custom firmwares I have tried.

 

[bcbob]

Dash Cam viewer wrote an upgrade of their site to accept 1031. So I thought it might be the latest.