GITUP GIT2 factors affecting battery usage

shredder

New Member
Joined
Jan 29, 2016
Messages
23
Reaction score
3
Country
United Kingdom
Recently started using my GIT2 Pro package and am wondering about battery usage. I see there are plenty of post here and elsewhere regarding GIT versus others etc. but I am more ineterested in how particular config settings affect battery life. I tested on mountain bike trip the other day and reckon I got about 1 hour max total (this was over many videos where I kept stopping and changing settings).

Is there any sort of rule of thumb that says for example 1080/60 drains at 1.5 time the rate of 720/60 or turning on gyro stabilsation doubles the drain or narrow view only uses half power... I hope your see what I am getting at ;-)

For bursts of short video activity like kart racing I dont see there being a problem but if I am out on bike or snowboard all day I would like to know how best to manage battery power to minimise having to stop and keep changing batteries.

Thanks
 
I think the main factor is how many bytes are written to the memory card. 1080P60 uses a lot more than 1080P30, nothing else is really worth worrying about, even turning the screen off doesn't make much difference.

Except for wifi - that uses a lot of power.
 
Oh I forgot one - what about the remote control (RC pairing)?
 
Oh I forgot one - what about the remote control (RC pairing)?
The remote control uses zero power 🙂

Well, an immeasurable amount anyway.
 
Ah yes I was wondering about gyro. Must take some power to keep it spinning ;-). On test ride I had Gyro on for last half so beginning to see where the battery goes.
 
Ah yes I was wondering about gyro. Must take some power to keep it spinning ;-). On test ride I had Gyro on for last half so beginning to see where the battery goes.
It doesn't actually spin, it just resonates, same principle but doesn't take so much power.

MeunHawo54qPRY5S.jpg

https://www.ifixit.com/Teardown/iPhone+4+Gyroscope+Teardown/3156
 
Last edited:
Got me thinking on huge ( 20 - 30 tons ) gyros used to make cruise liners more pleasant to ride, this of course being before the ships got little "wings" under water to do the same while ship is moving, but gyros allso work when ship is not moving.
Offcourse forgetting to fold in "wings" before you dock your massive ship is a bad idea, a good way to loose that captain job you worked so hard and long for.

Allso in general gyros is pretty cool stuff, allso what turn / aim the hubble telescope as i undestand it.

And a fjew other wierd things over time 😀
9bbc5b7c971d6585ac3af929d697d1d1.jpg
 
Last edited:
Hi,
I bought an Git2, used it 2 times on my helmet (motorcycle/street) and till now it seems to be really good.
My only "complaint" is about the battery: Today in a 28 minutes ride, the battery died. For what i read here, this so short time it's due to the fact that i was recording in 1080P60 and with Gyro on, right? I also used GitUp remote to connect the wireless of the camera to see on Finalcam app if it was well positioned on the helmet and then i start recording (command sent by the remote). So, i then closed the app but didn't turn off wireless (i don't know it it stays on); could this be a factor for that time?

To end, as anyone tried to ride on a motorcycle (street) with Gyro off? What was the result?

Thanks
 
Hi,
I bought an Git2, used it 2 times on my helmet (motorcycle/street) and till now it seems to be really good.
My only "complaint" is about the battery: Today in a 28 minutes ride, the battery died. For what i read here, this so short time it's due to the fact that i was recording in 1080P60 and with Gyro on, right? I also used GitUp remote to connect the wireless of the camera to see on Finalcam app if it was well positioned on the helmet and then i start recording (command sent by the remote). So, i then closed the app but didn't turn off wireless (i don't know it it stays on); could this be a factor for that time?

To end, as anyone tried to ride on a motorcycle (street) with Gyro off? What was the result?

Thanks
If you turn the wireless off then you should get close to 100 minutes, a big improvement. The gyro will only be a small difference. If you can supply it with power, maybe from a car dashcam hardwire kit then you can use it as a dashcam, the only thing it is missing is GPS.
 
Wireless drains so much the battery???
Yes, it has to broadcast radio waves through the air to everything that is listening, that takes a lot of energy. Partly the fault of the wifi protocol, it wasn't designed for a battery powered device to work as the network controller. The remote control doesn't use any power since the camera is just listening.
 
Hi,
I bought an Git2, used it 2 times on my helmet (motorcycle/street) and till now it seems to be really good.
My only "complaint" is about the battery: Today in a 28 minutes ride, the battery died. For what i read here, this so short time it's due to the fact that i was recording in 1080P60 and with Gyro on, right? I also used GitUp remote to connect the wireless of the camera to see on Finalcam app if it was well positioned on the helmet and then i start recording (command sent by the remote). So, i then closed the app but didn't turn off wireless (i don't know it it stays on); could this be a factor for that time?

To end, as anyone tried to ride on a motorcycle (street) with Gyro off? What was the result?

Thanks
I have a clip without gyro

And with gyro

[emoji106]
 
Yes, it has to broadcast radio waves through the air to everything that is listening, that takes a lot of energy. Partly the fault of the wifi protocol, it wasn't designed for a battery powered device to work as the network controller. The remote control doesn't use any power since the camera is just listening.

Hum, i'll try again but this time without forgetting to turn off the wireless 🙂
 
You were using the waterproof case, a skeleton or none? The sound of my video is not so good as yours.
These videos was with waterproof case. You can try with different sensibilty of mic in the menu of cam. I selected medium
 
Back
Top