Autobahndriver
New Member
- Joined
- Nov 14, 2019
- Messages
- 24
- Reaction score
- 3
- Location
- Lower Saxony
- Country
- Germany
- Dash Cam
- Mini 906 (sold), Viofo A129 plus duo
Hello to all,
my search for the problem was not successful so I start this post.
My new mini 0906 dual is working fine, except the „gps Log files“ are constantly empty. GPS position is shown in both camera files (front and rear) and it shows the correct data. When car was placed in a garage, the gps signal starts after app 30-50 seconds. When parking outside the signal is found immediately.
Using the Program “Dashcam viewer” or the “rdCAMPlayer V 1.1.7” both show the same problem. No data curve (speed / G-Sensor) and no position of car in the map.
I received a new gps mount by my dealer here in Germany, but the problem still exists.
Any ideas or someone with the same problem?
The mini 0906 is fitted with:
micro SD Samsung Evo 3+ Class 10 U3 64 GB
not connected to continous power
EDIT: after putting a brand new Firmware to the camera, everything works fine.
my search for the problem was not successful so I start this post.
My new mini 0906 dual is working fine, except the „gps Log files“ are constantly empty. GPS position is shown in both camera files (front and rear) and it shows the correct data. When car was placed in a garage, the gps signal starts after app 30-50 seconds. When parking outside the signal is found immediately.
Using the Program “Dashcam viewer” or the “rdCAMPlayer V 1.1.7” both show the same problem. No data curve (speed / G-Sensor) and no position of car in the map.
I received a new gps mount by my dealer here in Germany, but the problem still exists.
Any ideas or someone with the same problem?
The mini 0906 is fitted with:
micro SD Samsung Evo 3+ Class 10 U3 64 GB
not connected to continous power
EDIT: after putting a brand new Firmware to the camera, everything works fine.
Last edited: