GPS Wiring

[frankvdb]

The white wire is broken. Does someone to what pin it should be soldered?

 

[wozzzzza]

my guess would be the one that looks broken off

 

[frankvdb]

There are three pins, two of them were soldered before (preflipped by Niko).
Black= ground
Red= voc
White = rxd or txd

 

[flip9]

White goes to TXD according to this vid

If you are going to reconnect it, apply some leaded solder on the wire and the pad first. Lead free solder used in manufacturing is awful stuff to work on.

You might wanna clean up the GND wire too, theres a strand of wire sticking out too close to VCC.

 

[frankvdb]

White goes to TXD according to this vid

If you are going to reconnect it, apply some leaded solder on the wire and the pad first. Lead free solder used in manufacturing is awful stuff to work on.

You might wanna clean up the GND wire too, theres a strand of wire sticking out too close to VCC.

Thanks Flip9,
TXD was the one indeed. Soldering was %%^@$. My eyes are no microscopes. Hopefully the strain relief keeps it all together.

 

[jokiin]

if it gives you any further problems please let us know