Hardwire to Cellink Neo 6

[gamesfrager]

Hello, everyone.
I have a Cellink Neo 6 and wondering if I can hardwire the camera (A139 Pro) to it without the voltage cutoff box?
I don't need it nor want it

 

[joe384]

The hardwire kit also does the voltage conversion 12v -> 5v so it is needed for that.

There have been some threads where people have disabled the voltage cutoff and Viofo actually sent out a bunch of modified kits. Check this thread:

S

Thread 'Viofo HK3-C: Disable Low Battery Cutout for External Battery Bank Operation'

Apr 3, 2023

Pretty simple: Remove Q3 from PCB to disable the automatic low-battery cutoff if you’re wanting to be able to discharge dashcam batteries to 0%.

DO NOT PERFORM THIS MOD IF YOU ARE RUNNING OFF LEAD ACID BATTERIES, OR YOUR CAR’S STARTING BATTERY. Do not do this mod unless you know exactly what this mod is going to do to your batteries without having to ask someone else what it will do to your batteries. If you perform this mod w/ your car’s battery as the power source, you will more than likely irreversibly damage the battery due to way over-discharging it, and could possibly damage...

• SPL15
• Replies: 14
• Forum: Hardwiring and Batteries

• 
• 

 

[gamesfrager]

The hardwire kit also does the voltage conversion 12v -> 5v so it is needed for that.

There have been some threads where people have disabled the voltage cutoff and Viofo actually sent out a bunch of modified kits. Check this thread:

S

Thread 'Viofo HK3-C: Disable Low Battery Cutout for External Battery Bank Operation'

Apr 3, 2023

Pretty simple: Remove Q3 from PCB to disable the automatic low-battery cutoff if you’re wanting to be able to discharge dashcam batteries to 0%.

DO NOT PERFORM THIS MOD IF YOU ARE RUNNING OFF LEAD ACID BATTERIES, OR YOUR CAR’S STARTING BATTERY. Do not do this mod unless you know exactly what this mod is going to do to your batteries without having to ask someone else what it will do to your batteries. If you perform this mod w/ your car’s battery as the power source, you will more than likely irreversibly damage the battery due to way over-discharging it, and could possibly damage...

• SPL15
• Replies: 14
• Forum: Hardwiring and Batteries

• 
• 

Thanks, I was hoping of a more plug-n-play solution without this extra box. I ordered their hardwire cable and will set it to the lowest cutoff value.