Odd problem

[shspvr]

Flickering pink in app screen only with the bike is running with both front and rear cam My bike 07 Ninja 250 US Non Calif model

 

[estore009]

Unplug and plug the camera cable, and wrap the cable connectors with RF tape to avoid this RF interference problem!

 

[shspvr]

Unplug and plug the camera cable, and wrap the cable connectors with RF tape to avoid this RF interference problem!

That odd part is I warp them in aluminum foil and cloth tape to block rf noise on both camera and remote wire and that was still no go very odd

 

[shspvr]

Unplug and plug the camera cable, and wrap the cable connectors with RF tape to avoid this RF interference problem!

Turn out that bike non resistor spark plugs when should had resistor spark plugs but I also plan to get some of that 3M 425 aluminum foil tape and add over the top what I got installed for extras insurance.

 

[estore009]

Ask the seller for the replacement camera part if the same problem!

 

[shspvr]

Ask the seller for the replacement camera part if the same problem!

UPDATE so you get it
It turn out that bike had non resistor spark plugs

when it should have resistor spark plugs so I got new set of plugs

so now the issue has been resolved.

It well known fact that non resistor spark plugs can cause a lot of RF noise