joe384
Well-Known Member
- Joined
- Aug 29, 2019
- Messages
- 633
- Reaction score
- 300
- Location
- Essex
- Country
- United Kingdom
- Dash Cam
- Viofo A139 3CH, A139 2CH, Mobius w/ Varifocal Zoom
Hi,
I tend to forget to turn off my dashcam, so I want to have a parking mode bypass toggle switch.
If hardwired to the car fusebox, I could just have an SPDT switch which switches between BATT and ACC fuses and the common terminal going to dashcam BATT Terminal
I believe most dashcams with 3 wires take their actual current from BATT and use ACC as a trigger wire
If I did this with the cellink, the dashcam would be pulling the power from ACC OUT when in "parking mode off" position
Does anyone know if the cellinks support taking power from the ACC OUT pin on the output connector?
I tend to forget to turn off my dashcam, so I want to have a parking mode bypass toggle switch.
If hardwired to the car fusebox, I could just have an SPDT switch which switches between BATT and ACC fuses and the common terminal going to dashcam BATT Terminal
I believe most dashcams with 3 wires take their actual current from BATT and use ACC as a trigger wire
If I did this with the cellink, the dashcam would be pulling the power from ACC OUT when in "parking mode off" position
Does anyone know if the cellinks support taking power from the ACC OUT pin on the output connector?