Parking mode

ashley1407

New Member
Joined
Apr 9, 2015
Messages
1
Reaction score
0
Country
United Kingdom
Hi

My new Mini 0806 turned up yesterday and I'm arranging for an installer to fit it soon. Having been the unhappy victim of car park damage (with no note left) this past weekend, I'm keen to see what I can do with regards to recording whilst parked.

I've read that there's another mount in development that records at a low frame rate, detects impacts and then starts recording properly. I'm more interested in what functionality the camera can offer without this mount however.

I'm thinking about buying this:

https://www.amazon.co.uk/gp/B00851F5R4
My understanding is that I can continue to power the camera for a duration (about 2 hours) after parking using this device. Is that correct? Additionally, are there any other features of this camera that I've overlooked that may solve this problem?

Thanks.
 
The spec on that says 6 hours to infinity, so it wont go as short as 2 hours, but I haven't used one... might be a good idea to ask in the Blackvue or https://dashcamtalk.com/forum/forums/batteries-and-capacitors.87/ forums.

The 0806 can be set to wake up on impact and record for 10 seconds on internal battery which gives some chance of catching the culprit, keeping the camera on for 2 hours gives a much better chance though. There is also the motion detection mode but that's not really recommended.

Not sure what the status of the optional mount is, but given the lack of information from the supplier it is probably best to find an alternative solution such as your link.
 
Last edited by a moderator:
Back
Top