raul_sbd
New Member
I have the BlackVue 650GW dual channel and I would like to know what are your sensitivity settings on normal and parking mode please? I have it hardwired with magic box.
Many Thanks
Many Thanks
Sensitivity settings
- Thread starter raul_sbd
- Start date
StrayCam
Well-Known Member
I assume your settings with the DR650 are comparable to the DR750 models, which is what I have. A school of thought says parking mode should be much more sensitive than driving mode.I have the BlackVue 650GW dual channel and I would like to know what are your sensitivity settings on normal and parking mode please? I have it hardwired with magic box.
Many Thanks
As for me, and I assume some others, I do not really need to be notified about events while I'm driving the car. I will know if there is an event!... lol
Anyway, with all that in mind, some people use these settings:driving mode 2,2,2 and for parking mode 9,9,9. (I actually use 10,10,10 for parking mode) For motion detection while parked, something relatively low... 1-3?
I hope this helps some.
| Thread starter | Similar threads | Forum | Replies | Date |
|---|---|---|---|---|
| R | Blackvue Settings | DR650GW (1CH or 2CH) | 2 | |
| M | New parking mode delay & sensitivity fix | DR650GW (1CH or 2CH) | 9 | |
|
Sensitivity settings | DR650GW (1CH or 2CH) | 6 | |
| E | G-Sensor sensitivity for parking mode? | DR650GW (1CH or 2CH) | 16 | |
|
Can you turn down Movement Sensitivity ? | DR650GW (1CH or 2CH) | 3 |