Hi,
Paper manual delivered is really crap, nearly explain nothing, but worse, it doesn't correspond at all to my DVR (FW: 20140507 V1.0)
In the manual it's written :
1) Video resolution1296P30/1080P30/720P30
2) EV: 0/-0.3/-0.7/-1.0/-1.3/-1.7/-2.0/+2.0/+1.7/+1.3/+1.0/+0.7/+0.3
3) Flicker: 50/60Hz
4) Lens: Wide angle 135 degree+6G
5) White balance Auto/Sunny/Incandescent/Flourescent/Cloudy
6) LDWS detect: On/Off
7) LDWS calibration
8) TV type: NTSC/PAL
9) Auto power off
10) Date time display: Date time/off/date/time
11) Motion detection: Off/On
13) Power off screen: Off/1 minute/3 minutes/5 minutes
14) Video recorder mode: video+audio/video
15) G-Sensor precision: 2G/2.5G/3G/3.5G/4G/4.5G/Close
16) Beep sound: high/low/off
17) USB Mode: Mass storage/USB Camera
18) Choose card: Inner/Outter
19) Language: English/Russian/Chinese
20) Default settings : Yess/No
21) Format Yes/No
23) Firmware version
My setup is very different an many settings are simply missing... :-(
1) Resolution
2) Quality
3) AE Meter mode
4) WDR
5) LDWS Detect
6) LDWS Calibration
7) Flicker
8) White Balance
9) EV
10) Recycle
11) Motion Detect
12) Time setup
13) Auto power off
14) Power off screen
15) Date/Time stamp
16) Driver Number
17) G-Sensor Sensitivbe
18) G-Sensor Calibration
19) GPS
20) Velocity Unit
21) Default setting
22) Format
23) Choose card
24) Software Version
Where there is so much differences ???
Really missing:
14) Video recorder mode: video+audio/video
16) Beep sound: high/low/off
Paper manual delivered is really crap, nearly explain nothing, but worse, it doesn't correspond at all to my DVR (FW: 20140507 V1.0)
In the manual it's written :
1) Video resolution1296P30/1080P30/720P30
2) EV: 0/-0.3/-0.7/-1.0/-1.3/-1.7/-2.0/+2.0/+1.7/+1.3/+1.0/+0.7/+0.3
3) Flicker: 50/60Hz
4) Lens: Wide angle 135 degree+6G
5) White balance Auto/Sunny/Incandescent/Flourescent/Cloudy
6) LDWS detect: On/Off
7) LDWS calibration
8) TV type: NTSC/PAL
9) Auto power off
10) Date time display: Date time/off/date/time
11) Motion detection: Off/On
13) Power off screen: Off/1 minute/3 minutes/5 minutes
14) Video recorder mode: video+audio/video
15) G-Sensor precision: 2G/2.5G/3G/3.5G/4G/4.5G/Close
16) Beep sound: high/low/off
17) USB Mode: Mass storage/USB Camera
18) Choose card: Inner/Outter
19) Language: English/Russian/Chinese
20) Default settings : Yess/No
21) Format Yes/No
23) Firmware version
My setup is very different an many settings are simply missing... :-(
1) Resolution
2) Quality
3) AE Meter mode
4) WDR
5) LDWS Detect
6) LDWS Calibration
7) Flicker
8) White Balance
9) EV
10) Recycle
11) Motion Detect
12) Time setup
13) Auto power off
14) Power off screen
15) Date/Time stamp
16) Driver Number
17) G-Sensor Sensitivbe
18) G-Sensor Calibration
19) GPS
20) Velocity Unit
21) Default setting
22) Format
23) Choose card
24) Software Version
Where there is so much differences ???
Really missing:
14) Video recorder mode: video+audio/video
16) Beep sound: high/low/off
