Hi
Recently I observed that the camera still shows charging icon on screen regardless external power is plugged in.
Version Sj10 Pro 'N' firmware R0.1.0N 20220423.
The camera seems to works normally, charging led indicator goes red only when external power is plugged in, it goes off when the battery is full.
Often the camera stops responding to power button after following sequence:
- turn on on battery
- start recording
- plug external power in
- stop recording
Then I cannot start recording once again and power off the camera regardless external power is plugged in or disconnected. Touch screen and setting works normally. The only way to turn off the camera is to hold power button for ~15 seconds (forced shoutdown without turn off logo?).
Does anyone have the same issue?
![Untitled.jpg Untitled.jpg](https://dashcamtalk.com/forum/data/attachments/72/72508-e99427d35be8b1c83630a35bbbaae1e3.jpg?hash=6ZQn01vosc)
Recently I observed that the camera still shows charging icon on screen regardless external power is plugged in.
Version Sj10 Pro 'N' firmware R0.1.0N 20220423.
The camera seems to works normally, charging led indicator goes red only when external power is plugged in, it goes off when the battery is full.
Often the camera stops responding to power button after following sequence:
- turn on on battery
- start recording
- plug external power in
- stop recording
Then I cannot start recording once again and power off the camera regardless external power is plugged in or disconnected. Touch screen and setting works normally. The only way to turn off the camera is to hold power button for ~15 seconds (forced shoutdown without turn off logo?).
Does anyone have the same issue?
![Untitled.jpg Untitled.jpg](https://dashcamtalk.com/forum/data/attachments/72/72508-e99427d35be8b1c83630a35bbbaae1e3.jpg?hash=6ZQn01vosc)