Cunningchu
New Member
- Joined
- Jan 1, 2019
- Messages
- 1
- Reaction score
- 0
- Country
- Canada
Hello,
my car is a Mini cooper.
I am not sure if the mechanic installed the dash is too high as you will see the front cam cannot provide the full (left side) coverage. I tried to adjust the angle but I only be able to twist lower at once only, then it will completly show the front of the hood. if I set the angle the lowest (the front hood is shown), the alert of lane change / traffic light ahead is more sensiive.
Additionally, it is hard to record the car plate both for the front and rear particularly at night due to the light reflection. I was advised to buy Cpl filter but wonder the light reflection is caused by the cam's current position ~ too high.
the merchanic refuses to help, so I want to find out if these problems can be fixed instead of returning it to the store. thanks in advance
annie
my car is a Mini cooper.
I am not sure if the mechanic installed the dash is too high as you will see the front cam cannot provide the full (left side) coverage. I tried to adjust the angle but I only be able to twist lower at once only, then it will completly show the front of the hood. if I set the angle the lowest (the front hood is shown), the alert of lane change / traffic light ahead is more sensiive.
Additionally, it is hard to record the car plate both for the front and rear particularly at night due to the light reflection. I was advised to buy Cpl filter but wonder the light reflection is caused by the cam's current position ~ too high.
the merchanic refuses to help, so I want to find out if these problems can be fixed instead of returning it to the store. thanks in advance
annie
Attachments
-
Screenshot_20190101-102353_THINKWARE CLOUD.jpg274.8 KB · Views: 81
-
Screenshot_20190101-095420_THINKWARE CLOUD.jpg154.4 KB · Views: 79
-
Screenshot_20190101-094814_THINKWARE CLOUD.jpg481.5 KB · Views: 74
-
Screenshot_20190101-095739_THINKWARE CLOUD.jpg137.7 KB · Views: 69
-
20190101_101859.jpg233.3 KB · Views: 69
Last edited: