Custom Firmware Thread: *RELEASED* Ver 1.1.1aE [DR500GW-HD]

Re: Custom Firmware Thread: Coming Soon Ver 1.1.1aE [DR500GW

Mio said:
And what is your firmware?
Now blanking LEDs we did in 1.1.1
but we found that some work, others do not work
We now think how to make it work in all


How does one get the updated v1.1.1 firmware?
 
Re: Custom Firmware Thread: *RELEASED* Ver 1.1.1aE [DR500GW-

you guys write a personal message your requests
also write your email. The letter may get lost or I will erase it, as a small number of messages
I just easier then will send all ;)
 
Re: Custom Firmware Thread: *RELEASED* Ver 1.1.1aE [DR500GW-

Is the new custom few available yet? I have sent PM to Mio but guess he is dealing with too many messages. :lol:
 
Re: Custom Firmware Thread: *RELEASED* Ver 1.1.1aE [DR500GW-

Guys no translation of the documents. Once we have received, immediately send out all
 
Re: Custom Firmware Thread: *RELEASED* Ver 1.1.1aE [DR500GW-

Mio, can you post here some youtube videos of new FW from other russian people which they have it already , but only those videos without any Polarizing filter.
Want to see a difference in picture quality compared to the 1.005.
 
Re: Custom Firmware Thread: Coming Soon Ver 1.1.1aE [DR500GW

micahfy said:
I have been reading through all this thread, but still have no idea how to get the custom fw or install it. :?
I PMd Mio twice and I have know idea how to get the custom firmware or what its status is. Could someone please enlighten us what the status is and how to get the firmware?
 
Re: Custom Firmware Thread: *RELEASED* Ver 1.1.1aE [DR500GW-

As stated above by Mio, if you send him a message including your email address, once he has translated the documentation, he will send it to everyone that had sent him a request.
 
Re: Custom Firmware Thread: *RELEASED* Ver 1.1.1aE [DR500GW-

Pebo said:
As stated above by Mio, if you send him a message including your email address, once he has translated the documentation, he will send it to everyone that had sent him a request.
Thanks! PMd Mio with my email twice. So the staus is the firmware hasn't been distributed yet?
 
Re: Custom Firmware Thread: *RELEASED* Ver 1.1.1aE [DR500GW-

What are the features of Mio's latest firmware (ver 1.1.1)?
 
Re: Custom Firmware for DR500GW-HD | Higher bitrate | No sta

WirelessAndy said:
What are the features of Mio's latest firmware (ver 1.1.1)?

Mio said:
today completed the user 1.1.1rus
Compared with 1.0.5 in it a lot of changes. And need a good translation of documents
We would like to hire an interpreter for qualitative translation. But this takes time, and possibly money.
Therefore, one or two weeks will have to wait for the English version

sorry

changes compared to 1.0.5
v1.1.1
- Implemented three independent display mode: full-time running a media server parameters Pittasoft c (0), start with a script avserver.sh (1) and the launch of a custom-video settings (2)

- Mode Video = 2 adds the following features:
--- Mode selection AWB: custom or standard media server
--- Custom color adjustment AWB ("warmer" / "colder")
--- Adjust the brightness in day mode
--- Adjust the brightness in night mode
--- Speed ​​control exposure
- In Video 1 and Video = Video = 2 possibilities of the hardware flip the image

- Via the built-www-server view the following information is available on the DVR: internal temperature,
mac-address of the wireless interface, IP-address, the best channel Wi-FI for use

- Has the following modes of Wi-Fi: client mode Wi-FI, as well as fine-tuning mode has been added SoftAP

- All the procedures are optimized for speed

- Now you can copy files from the device to the maximum possible speed, and video files from the device in real time

- Rewritten the software update procedure now tracks the occurrence of errors during the update process
software, with specific diagnostic messages are issued

- All of the configuration log files, including the launch of avserver.sh moved to the directory BlackVue / Config

- On special request by storing configuration files sold registrar with SD-Card
in NAND Flash recorder and subsequent recovery on SD-Card after formatting tools registrar

- Implemented the ability to "jump start" the registrar mode (FAST), in this mode does not work upgrade registrar
Disable all the possible test does not work Wi-Fi, but the recorder will start as soon as possible

- Implemented the ability to disable the LED GPS and Wi-FI in normal operation mode, the registrar and parking

- The ability to select the profile of the sensitivity of the G-sensor logger (three profiles) to reduce the likelihood of
E-file appears when driving on roads with poor quality of the road surface

- To configure advanced settings of the recorder introduced a special configuration file config-custom.ini
 
Re: Custom Firmware Thread: *RELEASED* Ver 1.1.1aE [DR500GW-

Thanks! I guess I didn't scroll back far enough!
 
Re: Custom Firmware Thread: *RELEASED* Ver 1.1.1aE [DR500GW-

Hopefully I can get it too.
 
Re: Custom Firmware Thread: *RELEASED* Ver 1.1.1aE [DR500GW-

I'm using the English FW and my version.bin shows me 1.003, should I upgrade it to 1.005E before the custom FW release? I have been look around but couldn't find whats new in the 1.005e.

[firmware]
version = 1.003
model = 500GW
language = English
[software]
version = 2.030
model = 500GW
language = English
[config]
version = 1.030
model = 500GW
 
Re: Custom Firmware Thread: *RELEASED* Ver 1.1.1aE [DR500GW-

Is this version stable? Mio I never receive your email :(
 
Re: Custom Firmware Thread: *RELEASED* Ver 1.1.1aE [DR500GW-

I'd like to hear more about this:
# APS - standard access point
# APC - custom access point
# DIR - direct (P2P) Mode
# STA - station mode
#
Mode=APC
 
Re: Custom Firmware Thread: *RELEASED* Ver 1.1.1aE [DR500GW-

The guys with the transfer delay
You can update the firmware and use the default settings
Later will send manual

sent to all

SORRY
 
Re: Custom Firmware Thread: *RELEASED* Ver 1.1.1aE [DR500GW-

Mio said:
sent to all
you DA MAN!!!!!

You can update
original 1.003, 1.005 -> 1.1.1аES
1.0.3cES,1.0.5E -> 1.1.1аES
1.1.1аES -> original 1.003, 1.005, 1.0.3cES

Question.
I have 1.0.5ES, is that the same as 1.0.5E ?????
 
Re: Custom Firmware Thread: *RELEASED* Ver 1.1.1aE [DR500GW-

yes
in a hurry
 
Re: Custom Firmware Thread: *RELEASED* Ver 1.1.1aE [DR500GW-

great job cant wait to get this on tomorrow.

whats the ST setting in the g sensor value?
 
Re: Custom Firmware Thread: *RELEASED* Ver 1.1.1aE [DR500GW-

ST - standart (pitasoft)
low - 8G
normal - 4G
 
Back
Top