Philipgonzales3
New Member
Hi I have the A129 Duo Dashcam running firmware version V2.1, the cam is hardwired with a 3 wire HK3 hardwire kit to my 2020 Silverado.
The parking mode on the dashcam is not working consistently. I tested it earlier before I posted and all was working well for a bit. The cam will correctly power up and record while driving, never really had any issues while driving. It also goes correctly into parking mode, but after some time passes I will find the cam is doing the double beep over and over until I hit the record button while in parking mode. I can see that the cam is powered on and the parking mode symbol is in the top left corner.
I am running a SanDisk Ultra 256GB A1 microSDXC UHS-I class 10 card sold and shipped by Amazon. For ACC+ power I am using the heated steering fuse wheel fuse and for Batt+ I am using the garage door opener fuse (Has always on power, I verified by the fact that the dash cam is on with ignition off and the garage door buttons light up when pressed). This was the recommended setup on the forum for my truck.
Any ideas? Not sure exactly when the issue started but I don't think I had this issue when I first installed it. It seems like the issue sometimes happens after I go into the truck and then close the door again, but I couldn't replicate this issue earlier today so not really sure if that's just coincidence on the other times that this seemed to trigger the issue. MicroSD card was purchased in January. Should I just buy another one (or perhaps a different brand and model) and see if the issue goes away or would the double beep be caused by something else?
Any help is appreciated.
The parking mode on the dashcam is not working consistently. I tested it earlier before I posted and all was working well for a bit. The cam will correctly power up and record while driving, never really had any issues while driving. It also goes correctly into parking mode, but after some time passes I will find the cam is doing the double beep over and over until I hit the record button while in parking mode. I can see that the cam is powered on and the parking mode symbol is in the top left corner.
I am running a SanDisk Ultra 256GB A1 microSDXC UHS-I class 10 card sold and shipped by Amazon. For ACC+ power I am using the heated steering fuse wheel fuse and for Batt+ I am using the garage door opener fuse (Has always on power, I verified by the fact that the dash cam is on with ignition off and the garage door buttons light up when pressed). This was the recommended setup on the forum for my truck.
Any ideas? Not sure exactly when the issue started but I don't think I had this issue when I first installed it. It seems like the issue sometimes happens after I go into the truck and then close the door again, but I couldn't replicate this issue earlier today so not really sure if that's just coincidence on the other times that this seemed to trigger the issue. MicroSD card was purchased in January. Should I just buy another one (or perhaps a different brand and model) and see if the issue goes away or would the double beep be caused by something else?
Any help is appreciated.