I built a browser-based addon manager for the DR4800/X800. Runs on your PC, connects to the camera over SSH — no app needed.
WiFi Client ModeSwitch the camera from hotspot to WiFi client directly from the browser. Scan networks, connect, static IP support, auto-reconnect after reboot. Uses a bundled wpa_supplicant — nothing to install on the camera side.
Other features:
Still work in progress — WiFi, Tailscale and GPS are functional. Flespi full payload and Proxy-ARP forwarding still being tested. Feedback welcome.
GitHub: https://github.com/kpma1985/70mai_addons
WiFi Client ModeSwitch the camera from hotspot to WiFi client directly from the browser. Scan networks, connect, static IP support, auto-reconnect after reboot. Uses a bundled wpa_supplicant — nothing to install on the camera side.
Other features:
- Tailscale — remote access from anywhere, subnet routing
- GPS tracking with live map and NMEA debug console
- Flespi telemetry — push GPS + system metrics to your account
- Firmware upload via SSH or SD
- File browser and live log console
Still work in progress — WiFi, Tailscale and GPS are functional. Flespi full payload and Proxy-ARP forwarding still being tested. Feedback welcome.
GitHub: https://github.com/kpma1985/70mai_addons
