CH-100B: "Recording started" and "Recording failure 1" loop?

max789

New Member
Joined
May 9, 2017
Messages
7
Reaction score
0
Country
Canada
Hi, all

My CH-100B now alternates between "Recording started" and "Recording failure 1" after the car starts, and basically becomes unusable.

This seems to be a problem with the front camera.

Does any user have a similar experience? Is this likely to be a hardware problem or (fixable) software issue?

I updated the firmware to the latest version to no avail.

Further, if it is a hardware problem, can the front camera be replaced by a new CH-100B or CH-200 front camera, assuming the power and micro-USB sockets are identical?

Thanks in advance for any feedback.
 

1LECamaro2015

New Member
Joined
Apr 4, 2016
Messages
12
Reaction score
3
Location
Western NY
Country
United States
Dash Cam
Blacksys CH-100B
wiggle the rear camera connection at the front camera. mine does the same thing and it is because this connection is intermittent. when it loses the connection to the rear camera, the system shuts down and reboots.
 

Similar threads


Top