CPL-100 Filter Install Help

SuburbanScum

New Member
Joined
Oct 17, 2026
Messages
1
Reaction score
1
Location
Austin, Texas
Country
United States
1000036649.webp

Just got my first dashcam along with the filter and Im still seeing my dashboard reflection as though I don't even have the filter on. When I adjust it and look through the filter with my eyes the reflection is almost gone completely but when I put it on the lens its still there. I know in this photo the sun is shining right on it but even when Im not facing the sun its still there. What am I doing wrong? It doesn't come with any instructions, how do I properly adjust it? Thank you!
 
Just got my first dashcam
Welcome to the club, and congrats @SuburbanScum
First things first, before adjusting CPL Filter, you may need to adjust camera lens angle.
Generally speaking it’s a good idea to start around 50/50, and make small adjustment to find the best image quality for your application.
Right now it looks like you may have “too much sky”.
Now that we have “crosshairs” in the new VIOFO Dashcam APP this is a breeze to accomplish.
Just tap the tix-tac-toe symbol to enable / disable the crosshairs.
I would adjust your camera to 50/50, and film a test clip to keep as reference before you start adjusting CPL Filter.
See attached photos.

Here’s how lens adjustment effects light metering in camera;


Here’s what 50/50 looks like;


-Chuck
 

Attachments

  • APP Lens Alignment Lines .webp
    APP Lens Alignment Lines .webp
    39 KB · Views: 32
  • 50% Road & 50% Sky .webp
    50% Road & 50% Sky .webp
    259.6 KB · Views: 20
  • 60% Sky & 40% Road .webp
    60% Sky & 40% Road .webp
    163.2 KB · Views: 28
Back
Top