DDPAI Z60 Pro – Parking collision detection is not working.

[Asafy]

Firmware: v9.1.4.10

SN- H3620220201473

The dashcam correctly enters Parking Mode after the vehicle is turned off. Time-lapse recording works continuously while the vehicle is parked, so the camera remains powered and records normally.

Parking collision sensitivity is set to High. However, impacts and even closing the car door do not trigger an emergency/collision recording.

I also tested Sleep Mode. The camera does not wake up or create an emergency recording after an impact.

The G-sensor works correctly while driving and creates Emergency recordings when an impact is detected. The problem only occurs in Parking Mode.

Please check the device logs and advise whether this is a firmware issue or a hardware issue.

 

[DDPAI_Official]

Hello,

Our technical team needs some additional information to further investigate the issue.

Please let us know approximately when the issue occurred, such as when a collision or closing the car door did not trigger an emergency recording.

If you have not submitted a Feedback through the DDPAI App yet, please submit one and include the above information.

If you have already submitted a Feedback, please provide your APP account so our technical team can locate it.