So I took the recommendation from this site and got the G1WH from the recommended Chinese Ebay seller. Picture quality was good and I was satisfied with it even though the build quality is obviously really crap but I was not expecting top quality. First problem was that even after formatting cards (I tried one 16GB and two 32GB Sandisk class 10 sold from Amazon and not third party) and it would record but it would not loop record when full. I had planned to look into it more when within the first month (I commute 2.5 hrs per day so it worked for a quite a few hours in same setup) I noticed it was not on and thought it was just the power cord not working.
I ordered a mediabridge mini-USB lead and still same problem except now I get one blue light on the cam to illuminate. Tried different cars, indoor plugs, computer, laptop, etc. It does not power up and all it does when plugged in is that blue light illuminates. So;
- Less than few weeks
- Loop record never worked
- Noticed not working and thought it was power lead because the green light on power cord also stopped illuminating
- Got aftermarket mediabridge mini USB cable and still the same except for tiny blue light illuminated
Only other thing i can think is that even when I first got it and charged it, the battery never seemed to hold chart (if I am assuming right that the flashing battery signal meant it was low power).
Any suggestions or is it junk?
I ordered a mediabridge mini-USB lead and still same problem except now I get one blue light on the cam to illuminate. Tried different cars, indoor plugs, computer, laptop, etc. It does not power up and all it does when plugged in is that blue light illuminates. So;
- Less than few weeks
- Loop record never worked
- Noticed not working and thought it was power lead because the green light on power cord also stopped illuminating
- Got aftermarket mediabridge mini USB cable and still the same except for tiny blue light illuminated
Only other thing i can think is that even when I first got it and charged it, the battery never seemed to hold chart (if I am assuming right that the flashing battery signal meant it was low power).
Any suggestions or is it junk?
