DOD LS460W - New firmware - ISO stamp on/off

J

jimi21

New Member
Joined
Jul 17, 2014
Messages
1
Reaction score
1
Country
Germany
Hi, now you can turn OFF this FU**ING DOD marketing "ISO Stamp"!!!

LS460W
FW: HG1603250EN11
07E00ECA00A01

[url=http://www77.zippyshare.com/v/zudMfq5K/file.html]DOD_LS460W_FW_20160325.zip[/URL]

2a6a3xv.jpg



-----------------------------------------------------------------------------------------------------------------------
Firmware Installation Instructions

Please follow the following instructions carefully to ensure that your unit is not damaged:

1. Extract the file named “FWA8S711.bin”.

2. Once extracted, place this file in the root directory of your memory card. (The root

directory is the directory you first enter when you “browse” your memory card.

3. Ensure that your camera is powered off and has sufficient battery charge or is
connected to a power source.

4. With the camera powered off, put the memory card into your camera.

5. Power the camera on. The screen will remain black while the installation is in progress.

The firmware installation should take about 30‐60 seconds. DO NOT power off or
unplug your camera at this time.

6. When installation is completed, the camera will start itself up as normal.

7. Ensure that the firmware file is removed or the card is formatted
before using the camera.

(If the firmware file is left on the memory card, the camera will attempt to

install the firmware each time the unit is powered on.)

-----------------------------------------------------------------------------------------------------------------------

Enjoy!
 
Mine won't power on afther the firmware update the led remains blue. I'm afraid that the power went off during the update; that I didn't see happened... it seems that way...
Can anyone help?
 
Sorin1984 said:
Mine won't power on afther the firmware update the led remains blue. I'm afraid that the power went off during the update; that I didn't see happened... it seems that way...
Can anyone help?
Click to expand...
Never mind
I let the dvr with the power cord connected and with the sd card in with the firmware file and afther a while it began installing again
It's working now. Thx anyway
 
I deleted the firmware file.... I need to format the sd card too? it's working .... but afther the update, the battery seem strangely empty.. I've been using a external power for updating.
 
Sorin1984 said:
I deleted the firmware file.... I need to format the sd card too? it's working .... but afther the update, the battery seem strangely empty.. I've been using a external power for updating.
Click to expand...

always best practice to format the card after updating
 
Ok i need to find the tool to format the 64gb card
 
Newer Firmware from 17.04.2017 is available
 

Attachments

  • FIRMWARE .jpg
    FIRMWARE .jpg
    271.5 KB · Views: 12
matrix55 said:
Newer Firmware from 17.04.2017 is available
Click to expand...
Great, mine died, but uhm, where? All websites I could find are are down.
One tip, run DOD/tiotec dashcams on their own adaptor, I now have two failed ones
 
Thank you!
I Have it now on the dod charger with firmware .bin on the root, add power, not much happens, after some time >10 minutes the blue led goes out.
No function, jeez.. stupid to use external usb charger from car, but also bad to have hardware with such sensitivity to it.. (no zener diode limiting filter..?)
 
I guess I have spare ls360w and ls460w display and gps and battery now :(
 
revo said:
Thank you!
I Have it now on the dod charger with firmware .bin on the root, add power, not much happens, after some time >10 minutes the blue led goes out.
No function, jeez.. stupid to use external usb charger from car, but also bad to have hardware with such sensitivity to it.. (no zener diode limiting filter..?)
Click to expand...
Today I ordered a new battery for my camera from Aliexpress, when I replace the battery I will check what the charging chip is and then I will let you know
 
Hi. Does anyone have the 17.04.2017 version of the firmware or a newer update? Looking to update the version but DOD doesn't have a support page for this model and I tried the links above but they don't seem to work. If anyone can assist, that'll be greatly appreciated. Thanks.
 
Kubear said:
Hi. Does anyone have the 17.04.2017 version of the firmware or a newer update? Looking to update the version but DOD doesn't have a support page for this model and I tried the links above but they don't seem to work. If anyone can assist, that'll be greatly appreciated. Thanks.
Click to expand...
filetransfer.io

Download Data package from July 10th.

Free transfer of up to 6 GB of photos, videos and documents. Send large files via email or a link to share. No registration, no ads, just simple file sharing!
filetransfer.io filetransfer.io
I hope that works
 
You must log in or register to reply here.
Back
Top