Having trouble with the cable holder

[CuteFuzzyPuppy]

Hi Guys,

I just received my SG9665GC v2 and so far I love it! I tried to stick the cables in the triangular cable holder but the ferrite bead on the mini-USB cable doesn't seem to fit inside the holder. Am I doing something wrong? I noticed that the cables shown here don't have the ferrite bead. Did I get the wrong cable? Thanks!

 

[Street Guardian USA]

 

[CuteFuzzyPuppy]

Thanks, that's very helpful! Looks a bit painful for the cable, but you're the expert . I'll give it a shot.

 

[jokiin]

yeah loop the power cable to position the ferrite above the AV out port and it clips in ok

 

[alexp999]

I found I had to file down one side of the gps jack too as otherwise it was pulling on the camera with the cable cover used. Not an issue if just camera though.

 

[niko]

I found I had to file down one side of the gps jack too as otherwise it was pulling on the camera with the cable cover used. Not an issue if just camera though.

Have you tried 3.5mm short extension cable?. It has thin outer layer on the jack.

 

[alexp999]

I was going to use that, but the cable was already a bit too long, and I had no where to put the excess.