I have received the new nini cam and find the instructions incomplete. First, (after installing a micro card) which USB port do I plug my wires into. I've hooked it to the computer and I get a blue screen that says "mass storage". only one button will do anything in this mode, the on/off button. Then I plugged the USB into the GPS part and see a picture but still can't get a menu or anything else by pushing the different buttons which are referred to in the instructions. I can get the pictures and video to play back on the computer by changing USB connections. I see a flashing led (red and blue, sometimes solid one or the other) but have no idea what it means as the is no reference to it in the instructions. In the "standby mode" I'm supposed to push certain buttons but have yet to see anything called or labeled "standby". Somewhere in here there is a menu to change certain things but I have to find "standby" first. I drove for five hours, it started recording after one and a half hours and quit after about 45 minutes of recording, nothing the last 2 hours. Where do I go from here?