You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
LF sticky pad replacement
- Thread starter ghggfffr
- Start date
klatch
Active Member
- Joined
- Apr 19, 2016
- Messages
- 141
- Reaction score
- 86
- Country
- Canada
- Dash Cam
- SG9665GC v2, A119S, A118C
I'm not sure what "LF" is supposed to stand for, but the tape for the mount is a 3M VHB tape (VHB = Very High Bond). You can get it in rolls at most hardware stores or amazon and then put two strips on, cut to size. The one I got off amazon.ca was "Scotch Extreme Mounting Tape". Most people prefer to get black tape as it tends to be less noticeable than the normal grey tape.What is it called so I can search for some?
wryliewhiley
Member
- Joined
- Dec 24, 2016
- Messages
- 41
- Reaction score
- 5
- Country
- Australia
My Viofo A119 came with a piece of string to use with a sawing action to cut the pad off the glass, AND a spare pad. I thought that was very considerate of them. Luckily it came off with negligible damage to the sticky surface and I could re-attach
m0fo
Member
I used a Victorinox small pocketknife (this was the blade: http://www.airsoft1.ro/files/briceag-victorinox-Classic.jpg) to get off the GPS mount of a A119S today. The pad had the small circles pattern on the adhesive pad but I could just re-seat again.
The GPS mount of A119S is the same with the one found in the latest batches of A119.
The GPS mount of A119S is the same with the one found in the latest batches of A119.