So I'm on the latest firmware from a few days ago (N4PS_VT-EFD251) which introduced a few new features and modes. However I can't seem to get the parking mode to turn on and off correctly.
Parking Mode Detection to "ACC" - N4 Pro S starts when car starts, but when I turn off the engine, N4 Pro S stays on and doesn't actually go into parking mode just continues recording in normal mode.
Parking Mode Detection to "Auto" - N4 Pro S doesn't start up when I turn on the engine, but once turned on manually by pushing the POWER button, it goes into parking mode fine.
Parking Mode Detection to "G Sensor" - N4 Pro S doesn't start up when I turn on the engine, but once turned on manually by pushing the POWER button, it goes into parking mode fine.
Other settings:
OBD Kit is set to cut off at highest voltage 12.4 V
Parking Mode is set to 2 hours. For Auto and G Sensor "Parking Mode Detection", the parking recording stops after 2 hours as expected.
I was kind of hoping "Auto" was in between ACC and G Sensor since they're both kind of "half working".
I've actually moved the camera from my car (MG 3 Hybrid+) where "Auto" had it working correctly to my wife's car (Honda City eHEV) which resulted in the areas I mentioned.
Not sure if there's anything I should be aware of to make this work?
Parking Mode Detection to "ACC" - N4 Pro S starts when car starts, but when I turn off the engine, N4 Pro S stays on and doesn't actually go into parking mode just continues recording in normal mode.
Parking Mode Detection to "Auto" - N4 Pro S doesn't start up when I turn on the engine, but once turned on manually by pushing the POWER button, it goes into parking mode fine.
Parking Mode Detection to "G Sensor" - N4 Pro S doesn't start up when I turn on the engine, but once turned on manually by pushing the POWER button, it goes into parking mode fine.
Other settings:
OBD Kit is set to cut off at highest voltage 12.4 V
Parking Mode is set to 2 hours. For Auto and G Sensor "Parking Mode Detection", the parking recording stops after 2 hours as expected.
I was kind of hoping "Auto" was in between ACC and G Sensor since they're both kind of "half working".
I've actually moved the camera from my car (MG 3 Hybrid+) where "Auto" had it working correctly to my wife's car (Honda City eHEV) which resulted in the areas I mentioned.
Not sure if there's anything I should be aware of to make this work?