JoePGM
Member
- Joined
- Jun 18, 2020
- Messages
- 54
- Reaction score
- 28
- Location
- London
- Country
- United Kingdom
- Dash Cam
- Yi Smart DashCam, Vicovation MF3, Boscam S1
Hi Folks, I give some testing on my new A129Pro these days and find that my unit have double beep during recording.
My SD card is a Samsung EVO+ 128GB card, 100% genuine, formatted inside the dash cam. Recording spec is WDR-OFF, 1440p 60FPS+ 1080p 30FPS, bitrate high, no parking mode, no wifi, firmware v1.3. The sd card has running hwtest is 100% ok and checked with crystal disk at around 65 Mb/s write speed. Dash cam is powered through the original viofo USB cable to the GPS unit.
The unit have occasional double beep during recording, especially when running under direct sunlight. The unit keep recording onward, that's no shutdown no freezing. The double beep didn't occur (so far through these test days) during evening and night time. Taking out the SDcard and put it into my pc, the video is interrupted and missing about 3-5 sec during the double beep period.
The dash cam goes really hot after 10-15min running, the sd card and the rear camera cable plug (the end that plug into the front camera body) also goes very hot when unplugging. I doubt it is an overheat issue and causing the double beep with record interruption.
Any idea?
My SD card is a Samsung EVO+ 128GB card, 100% genuine, formatted inside the dash cam. Recording spec is WDR-OFF, 1440p 60FPS+ 1080p 30FPS, bitrate high, no parking mode, no wifi, firmware v1.3. The sd card has running hwtest is 100% ok and checked with crystal disk at around 65 Mb/s write speed. Dash cam is powered through the original viofo USB cable to the GPS unit.
The unit have occasional double beep during recording, especially when running under direct sunlight. The unit keep recording onward, that's no shutdown no freezing. The double beep didn't occur (so far through these test days) during evening and night time. Taking out the SDcard and put it into my pc, the video is interrupted and missing about 3-5 sec during the double beep period.
The dash cam goes really hot after 10-15min running, the sd card and the rear camera cable plug (the end that plug into the front camera body) also goes very hot when unplugging. I doubt it is an overheat issue and causing the double beep with record interruption.
Any idea?
Last edited: