Problems with B60 dashcam.

4x4

New Member
Joined
May 1, 2016
Messages
3
Reaction score
0
Country
Estonia
Hi guys,

I have purchased a B60 dashcam off eBay and having some issues with it.

When connected to a power outlet (with an iPod adapter 5.1V, 2.1Amps) I get a buzzing soundtrack whist recording.

I have uploaded this video on YouTube which can be seen here:


I have tried the same camera in the Car with the supplied cigarette lighter adapter and it seems to be fine.

Also the battery does not hold a charge, I charge it overnight with the iPod adapter, it shows that it is charging but as soon as I plug it out it works for around 8seconds and switches off due to low power.

After writing to the supplier about this issue he has sent me another camera which has the same issue. Ironically the replacement has also problems with booting, when I turn it on it gets stuck on the Auto-Vox boot screen. After it has been connected to the adapter for a period of time and I switch it off-on, it works again.

Here is a video with the two cameras, left one being the second one which supposed to be a replacement for the right one.
It didn't boot up at the first time and just displayer a "white" screen. Switched itself off, second time powering it on it booted but switched off due to low battery. Despite both cameras displaying full batteries they switch off after about 8seconds.

 
Last edited:
Sounds like the first one is fine and there may be something wrong with your iPod charger. Dashcams are SUPPOSED to turn off after a short time when power is unplugged or turned off. The battery inside is only there to make sure the last file is closed properly, otherwise it will be corrupt and unreadable... And in a crash, it's that very last file you'll need to assign blame.
 
The same symptoms occur when the USB cable is defective,
Replacing the USB cable ?
 
I have tried the camera in the car now, and it works fine there with the cigarette lighter adapter!?
Perhaps the household power supplies are the reason for buzzing. I tried with the iPad charger (5V 2.1A), USB output from the notebook, iphone charger and it buzzes with all of them.

When I drive the car for around two hours, the camera charges up and works for about 1minute on battery life - is this normal?

Should I just rewire the wiring and leave the camera on permanently? It's just annoying to switch it off-on all the time manually.

Thanks,
 
Last edited:
Please read what I wrote above. Dashcams are not supposed to keep running after power is disconnected. They are not action cameras and the battery in them is not intended to last more than about one minute at most. You should leave it plugged into the lighter so that it will automatically turn on and off with your car.
 
Thanks, got it. Sent the "replacement" camera back, as it had booting problems. Looks like my first camera didn't have any problems then 🙂
 
Back
Top