V1 loses correct time and date.

[Damn Dirty Ape]

I have my v1 unit connected to switched power using the 5v socket plug into a 5v socket I wired to the fuse block. Used an add-a-fuse. Power comes on and off as it should - but shouldn't the unit be retaining time and date with a little battery inside? Makes it very hard to locate something on the mem card when I need to.

 

[niko]

Do you use gps antenna as well?
I assume you have date, time and time zone set correctly on the first place?

 

[Damn Dirty Ape]

Yes and yes.

Do you use gps antenna as well?
I assume you have date, time and time zone set correctly on the first place?

 

[Street Guardian USA]

What firmware version? Only the newer versions of V1 firmware have auto date time sync. When did you purchase and what's the serial number off the back

 

[Damn Dirty Ape]

What firmware version? Only the newer versions of V1 firmware have auto date time sync. When did you purchase and what's the serial number off the back

I will check later today and reply back.

 

[Street Guardian USA]

Install the latest V1 firmware:
https://streetguardian.info/support

 

[Damn Dirty Ape]

Install the latest V1 firmware:
https://streetguardian.info/support

Will do, what is the firmware for that is first in that list?

 

[Street Guardian USA]

Scroll to the bottom, you want
"SG9665GC - V1 - Firmware update latest » "
Change log and version is inside the zip file.

 

[jokiin]

if you still have issues after updating just let us know and we'll get you sorted

 

[Damn Dirty Ape]

if you still have issues after updating just let us know and we'll get you sorted

I finally got the firmware installed and reset everything to correct settings, time date etc. I'll check later tonight to see if things are different.