Vantrue Horizontal FOV Database

Chuck McCoy

Well-Known Member
Joined
Jun 9, 2022
Messages
4,916
Reaction score
4,836
Location
California
Country
United States
Dash Cam
2026 Minimum Spec: STARVIS 2 & HDR & Low Power Parking Mode
The purpose of this thread is to document the Measured Horizontal FOV of all future Vantrue dashcams I receive for test & review.
I settled on this method because all you need is a wall, and a yardstick.
It’s easy to duplicate so anyone can confirm & verify my measurements.
The hardest part to maintain accuracy / consistency is to place the camera lens in the exact same location every time, (50cm from wall).
Height doesn’t really matter as long as it matches the yardstick, (28cm).
After obtaining the FOV measurement in centimeters, plugging two known measurements into a right triangle calculator will provide the Horizontal FOV in degrees.


Here’s a photo of my testing jig;

Test Rig 2 .webp


Here’s a summary, see each camera’s dedicated post;

FRONT:
112.26° E1 Pro

REAR:

IR INTERIOR:

IR INTERIOR (LED’s on in darkness):
 
E1 Pro
112.26°

E1 Pro .webp
 

Attachments

  • Test Rig 2 .webp
    Test Rig 2 .webp
    160.2 KB · Views: 111
  • VT-EEJ151 October 21, 2025 .webp
    VT-EEJ151 October 21, 2025 .webp
    21.4 KB · Views: 122
Back
Top