sfttac
New Member
Call me crazy, but I know this worked at one time. The rear image is fine and can be selectively flipped upside down or mirrored in the settings. However, the front camera cannot be adjusted. You can mechanically move the lens, but only up and down. It does not rotate. All of my front facing videos are upside down! Any ideas? I have contacted wolfbox support and got what they said was the latest firmware. I asked for this because the gps wasn't working. This turned out to be a gps antenna issue, not a firmware issue. Regardless, the firmware they gave me matched the version I had.
I did find an older version of the same firmware on another forum (not here), and I downloaded it and tried it. The font changed slightly and I see that the firmware is 3 months older than what I originally had. The front image is still upside down.
On this site I found it mentioned that there is a config.ini file.
I located this file on the SD card (it was in a hidden directory) and it contains the following:
The reverse lines are adjustable, and I suspect that is what BacklinePts is. The other offsets may be where in the frame the screen shows you the video when in drive or in reverse (the camera remembers the position chosen when you put it in reverse, which is a nice feature).
Perhaps there is another variable I can set that will flip the front camera image?
I've tried resetting the settings, formatting the SD card, removing config.ini and holding the reset button in. Nothing seems to affect it.
I did find an older version of the same firmware on another forum (not here), and I downloaded it and tried it. The font changed slightly and I see that the firmware is 3 months older than what I originally had. The front image is still upside down.
On this site I found it mentioned that there is a config.ini file.
I located this file on the SD card (it was in a hidden directory) and it contains the following:
LcdPWMOffset=20 ;
PRMOffset=208 ;
ScdOffset=340 ;
BcScdOffset=538 ;
RecordWithAudio=0 ;
TimelapseByWd=0 ;
BacklinePts=0,190,250,0,650,0,900,190 ;
The reverse lines are adjustable, and I suspect that is what BacklinePts is. The other offsets may be where in the frame the screen shows you the video when in drive or in reverse (the camera remembers the position chosen when you put it in reverse, which is a nice feature).
Perhaps there is another variable I can set that will flip the front camera image?
I've tried resetting the settings, formatting the SD card, removing config.ini and holding the reset button in. Nothing seems to affect it.