How to apply the 0.5mm 3M EVA Foam Pad to your VIOFO A119S DashCam

OCD Tronic said:
Thanks for your business.

The EVA Foam is to prevent video/audio noise. The curvature of the glass will slowly pull the edges of the plastic mount. A small gap will develop over time. The EVA Foam fills this gap so you can enjoy stable video, and rattle free audio recordings.
Click to expand...
Great - thank you!
 
OCD Tronic said:
The EVA Foam is to prevent video/audio noise. The curvature of the glass will slowly pull the edges of the plastic mount. A small gap will develop over time. The EVA Foam fills this gap so you can enjoy stable video, and rattle free audio recordings.
Click to expand...

I installed the foam just after I got the dash cam. This made the camera stable until today, when I noticed (that even still with the foam installed!) a significant wiggle between the mount and the camera.

Can I install another layer of foam on top of the old one, or should I take the old foam off first? What would be the best way to do this, if I do need to remove it?
 
minidrc said:
I noticed (that even still with the foam installed!) a significant wiggle between the mount and the camera.
Click to expand...
I see that on my front camera too, just after about 2 weeks of installing the foam pads. and after installing the foams I did remove the cameras from GPS mounts about 2-3 times only.
 
minidrc said:
I installed the foam just after I got the dash cam. This made the camera stable until today, when I noticed (that even still with the foam installed!) a significant wiggle between the mount and the camera.

Can I install another layer of foam on top of the old one, or should I take the old foam off first? What would be the best way to do this, if I do need to remove it?
Click to expand...

You're welcome to experiment adding part or all of another layer of foam. (or just replacing the foam with a fresh piece)
 
I bring my cam in every night and I'm noticing some wear on the foam. I'm wondering if a Teflon material, like what you find on PC mouse feet, would be a good option.
 
seriosbrad said:
I bring my cam in every night and I'm noticing some wear on the foam. I'm wondering if a Teflon material, like what you find on PC mouse feet, would be a good option.
Click to expand...
I'm actually using, on two cameras, a solution that BCHobbyist came up with and discussed in this thread. Seems to be working well enough. It doesn't can eliminate the gaps that were causing the movement, so I'm not sure why it needs to absorb movement. I got BCHobbyist to send me some tape for a few dollars but you could get a larger amount through some other means (ebay?) if you think you will need to replace it every so often (not sure you would). The post linked above has some video showing the improvements.
 
@estore009 Could you please send some 3M sticky pads for the A119 dashcam as the other resellers have sent some to their customers. Thank you

Sent from my SM-G920F using Tapatalk
 
VRBabe16 said:
@estore009 Could you please send some 3M sticky pads for the A119 dashcam as the other resellers have sent some to their customers. Thank you

Sent from my SM-G920F using Tapatalk
Click to expand...

I think you mean 3M EVA Foam Pads (which are also sticky, but only on one side of course)

3M Sticky Pads (leaving off VHB/EVA part of the name) generally refers to the 3M VHB Adhesive Pads that hold the mounts to the glass.
 
VRBabe16 said:
@estore009 Could you please send some 3M sticky pads for the A119 dashcam as the other resellers have sent some to their customers. Thank you

Sent from my SM-G920F using Tapatalk
Click to expand...
It is ok,and PM your shipping address,thanks!
 
OCD Tronic said:
I think you mean 3M EVA Foam Pads (which are also sticky, but only on one side of course)

3M Sticky Pads (leaving off VHB/EVA part of the name) generally refers to the 3M VHB Adhesive Pads that hold the mounts to the glass.
Click to expand...

I need the two sided sticky pads that the gps mount fits to the screen
 
Thanks for this post and reminding me that I might have these pads in my original box as mine was endlessly restarting now that we're hot here PHX, AZ
The foam "should" take care of the issue was there was just enough play to allow the cam to have too much play/slop to maintain correct connectivity.
 
Hi I have had my Viofo A119S for nearly a year and added the EVA foam pad at the time I installed the camera. to prevent rattling noise during playback which worked perfectly. I have only removed the camera three times in that year but now notice there is a rattling sound on the audio when travelling over slightly uneven road surfaces.. Just purchased new pads from OCD Tronic and they arrived in the UK at my home today.. I am just wondering if anyone else with similar experience has either replaced the original foam pads with new ones or tried adding a second pad over the original to see if that removes the rattling sound.. The camera itself is excellent...Thanks......
 
Just an update on the above rattling issue.. I applied a second EVA foam pad on top of the original EVA pad I had applied a year ago when I purchased the A119S V2 camera.. The camera is now a nice tight fit and GPS is still functioning correctly.. However I played some footage back and still noticed a slight rattle in some video clips which was annoying and puzzling me... Then I figured it out...I have a Viofo polarising lens cover fitted to the lens of the camera, it is fitted in the correct position but I noticed there was some very slight play in it in the summer heat we are having..placed a very very thin strip of cardboard on the bottom clip of the plastic filter (which does not interfere with the `lens capture` area) and it attached tightly to the lens of the camera...no movement and happily no more rattling in video play back clips..May be of help to some of you with these filters if you are getting some playback rattle on video clips.....
 
You must log in or register to reply here.
Back
Top