Hi all,
First time poster here so let me know if I have breached any rules or etiquettes.
In November 2022, I purchased a Viofo A139 with the HK3 hardwire kit. I did all the wiring myself and everything was working fine until now. My camera now refuses to turn on.
After some diagnosing, I...
Hello, *sorry for my English*
Today I buy 322GW model and I follow instructions to fully charg on USB cable, so I did it like 3h and blue light is gone so fully charged, and I went to car, and before I do anything I gate alert on screen *battery low connect in the car adapter* like what's...
I'd like to ask a question - I need to instal longer cable (USB - Mini USB-B) in a car as power supply for dashcam. But when I do this, camera will start to blink and keeps shutting down, memory errors and such troubles (not usable). Several cables (also widths of them) tried. It seems to me...
Due to an unexpected issue, I am hoping someone can give me the pin and ring (2) configuration of the plug that inserts into my F50 dash cam. At least, tell me which is the ground. I'm thinking it is the outer ring (the long one). Thanks so much for your help and stay safe.
Hi all, I'm looking to DIY an output cable for Cellink-B with female cigarette socket, as the one that came stock was too short for my need. The cable that I require looks like this (pic 1) However, I don't live in the US so I don't have access to their accessories. I plan to DIY the above...
Please can someone tell me how long the power cable is for this cam? I already have a dash cam and am looking to buy a 'rear cam'. I was wondering if the cable is long enough to go from the back of the car to the front. If not, does anyone know of a rear cam with a good long power cable?
Hello everyone!
I bought a MateGo MG380G from SpyTec a few months back and a couple days ago the power plug broke. One of the two wires severed right at the point where they enter the DC plug. I bought the device through Amazon.
I contacted SpyTec to ask how to replace it and their response is...
Hi folks. Just bought an E-Prance cam and ready to install. Going to put it behind the rear view mirror but will need to run the power cable along the top and then down the side of the windshield. What do you use to hold it in place? Double sided tape?
Any advice would be appreciated.
I've got 2 for sale on Ebay
http://www.ebay.fr/itm/331937447081?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
http://www.ebay.fr/itm/331937447082?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649