teardown

  1. EsQueue

    Insides of BlackVue B-124 (DIY 11,852 mAh @12.8v / 151.7 W/h + extension battery for under $50?)

    Hello, I just decided to take apart my brand new BlackVue B-124 and post some internal pictures as I couldn't find any. I found out a few things from doing this. On the picture of the circuit board the board name is NEO6 REV-G. I didn't separate the batteries from the upper part of the case as...
  2. Hex

    SG9665GC V1 teardown (and some EMI measurements/shielding)

    Hi, welcome to everyones favorite segment: Teardown! Foreword After swapping my car over a year ago I dind't install the SG9665GC again because back then I had issues with RFI. I could either use amateur-radio and listen to DAB+ radio or record the traffic and listen to music from the USB...
  3. BCHobbyist

    A119S Disassemble & Lens Alignment & Refocus

    Decided to share my experience with several A119S dashcams all slightly blurry on the left side. If anyone has this type of issue return and exchange the dashcam. I wanted to tinker and working with approval from the vendor and VIOFO to repair my 3rd A119S. Far too much effort and detail for a...
  4. Harith Hamdan

    Papago GoSafe 310 Teardown

    After 3 years of usage. I found out that my lens is lightly out of focus. I decided to open my camera and rotate the lens manually to gain back the best focus for my camera. To open the cover, you can easily spot two screw on the camera`s bottom . Firstly you need to peel the sticker and will...
Back
Top