mrsand
New Member
Hi. Every one.
Thank you in advance for your help.
I have installed the cameras with the viofo HK3ACC kit. And the voltage reading is constant 14.5 volts in the red cable and with the ignition off the red cable is 12.8 and the yellow cable is 0 volts as it should be.
The thing is the camera does not comes out of parking mode when the engine is on. If I turn the camera off and the on it starts in normal mode, if I turn off the engine and the camera goes to parking mode in about 2 minutes, but does not comes out of that mode when the engine is on again and keeps recording in FHD. The parking mode is in auto event detection
Any thoughts.
Thanks
Thank you in advance for your help.
I have installed the cameras with the viofo HK3ACC kit. And the voltage reading is constant 14.5 volts in the red cable and with the ignition off the red cable is 12.8 and the yellow cable is 0 volts as it should be.
The thing is the camera does not comes out of parking mode when the engine is on. If I turn the camera off and the on it starts in normal mode, if I turn off the engine and the camera goes to parking mode in about 2 minutes, but does not comes out of that mode when the engine is on again and keeps recording in FHD. The parking mode is in auto event detection
Any thoughts.
Thanks