Hello everybody,
I use a B1W dashcam at the rear of my car. I'm very happy with this camera.
I would like to know if your camera has the same behavior when you start the engine. I explain here below :
- before to start the engine, I turn the key up to "Ignition ON" - all the electrical equipment can be operated, all dashboard lights turn on;
- the B1W starts also;
- to start the engine, I put the key for few fractions of second in the "start engine" position. At this time, there is a very very short power disconnection and the B1W is stopping;
- when the engine starts, the B1W starts again.
So, what I want to say is at every engine start, the B1W starts twice. I do not know if this is normal or is a problem with the camera.
I have a Viofo A119 (also with capacitors), but it does not switch on/off/on when I start the engine.
Thanks !
I use a B1W dashcam at the rear of my car. I'm very happy with this camera.
I would like to know if your camera has the same behavior when you start the engine. I explain here below :
- before to start the engine, I turn the key up to "Ignition ON" - all the electrical equipment can be operated, all dashboard lights turn on;
- the B1W starts also;
- to start the engine, I put the key for few fractions of second in the "start engine" position. At this time, there is a very very short power disconnection and the B1W is stopping;
- when the engine starts, the B1W starts again.
So, what I want to say is at every engine start, the B1W starts twice. I do not know if this is normal or is a problem with the camera.
I have a Viofo A119 (also with capacitors), but it does not switch on/off/on when I start the engine.
Thanks !