Connect generic camera to A129

[qalexk]

I have generic camera that i can use to record back of the car.
I wondering if there is USB video input pinout of A129 so i can wire up any camera i can buy.
For example:
https://www.ebay.com/itm/254086010812

 

[jokiin]

won't work, save your time

 

[qalexk]

did you test?

 

[Nigel]

No need to test, we know!

It has the wrong interface for an A129, and there is not much choice in cameras that have the right interface, basically the standard A129 rear camera, or the A129 IR interior camera.

 

[Leonauto]

I have generic camera that i can use to record back of the car.
I wondering if there is USB video input pinout of A129 so i can wire up any camera i can buy.
For example:
https://www.ebay.com/itm/254086010812

You pointed to the camera that transmits the analog signal, for Viofo you do not need a CCD camera but a CMOS camera and with a digital signal.
We checked on other simpler dashcams with similar cameras, even cameras from different manufacturers, having a digital signal conversion unit are not interchangeable.

 

[jokiin]

No need to test, we know!

It has the wrong interface for an A129, and there is not much choice in cameras that have the right interface, basically the standard A129 rear camera, or the A129 IR interior camera.

just to expand on that, even if you have the correct pinouts it still won't work with a different sensor as the firmware only has the driver for the 291 rear camera

 

[qalexk]

understood