DDPAI Z60 Pro 3ch Set - 4K Sony Starvis 2 IMX678 - 4G Cloud - Unboxing & First Impressions

[Noypi_RH]

It is back online. I am able to login to DDPAI app and connect remotely.

Yes, I can confirm as well that the ddpai app is indeed logging me in as it should and able to access my ddpai dashcams.

Screen_Recording_20250825_210714_DDPAI.mp4

drive.google.com

 

[PelleTh]

Thank you for your review post. I also recently bought Z60pro with 4g module. My issue is that after I have done all the installation well, everything is working fine including 4G LTE, parking mode. But I run into issue that when I choose the device mode to sleep in parking mode, I can't wake it up from 4G LTE remotely, and on the app, it shows "Failed to switch device mode: please try again later", but when I tried again, the device said offline, even 4G module light is on, and working. But the Z60pro woke up when I tested the car shaking and it records for collision movement. When I put z60 pro into time-lapse mode and normal recording in parking mode, I can remotely view the device. But I want sleep mode to be working because I don't want a 48 hrs limitation for time-lapse mode and normal recording mode. My 4G network test is normal, full signal strength, ddpai and z60pro latest version (global), but my Z60pro fails to wake up from sleep mode. I am thinking may be I can downgrade to previous firmware, but currently unable to find previous firmware. If you have any solution for that, really appreciated it.

Do you need any subscription with DDPAI like you have when you use BlackVue, remote services?

 

[Julian23]

Do you need any subscription with DDPAI like you have when you use BlackVue, remote services?

No.
You just need a SIM card with data and you are good to go.

 

[genshin2024]

No.
You just need a SIM card with data and you are good to go.

Updated: After going through with customer service and self-testing, finally found out that DDPAI 4g module doesn't work with special sim card (in US, we can get AT&T or T-mobile data only sim AKA tablet sim without phone line). Customer service can't figure it out and they didn't reach me out again after I summited logs file, I found out by myself. Found out their included sim card with subscription works pretty fine except low data speed which makes the live view image low quality, but if you have your own sim card without any data throttling, the live view quality is awesome. Live view quality is better than 70mai live view but 70mai 4g module works with data-only sim. Unfortunately, I have to switch to 70mai because of I am not able to wake up and live view z60pro with my sim card.

 

[intothedragon]

I just got the V60 Pro dual-channel, with the front and rear cameras only. The image quality is very impressive indeed, but the DDPAI watermark is really annoying, and it seems there's no way to turn it off just the watermark, but you need to completely turn off the Timestamp for this. Could anyone please confirm there's no way to turn off the watermark on this device?

 

[linuxliu]

I just got the V60 Pro dual-channel, with the front and rear cameras only. The image quality is very impressive indeed, but the DDPAI watermark is really annoying, and it seems there's no way to turn it off just the watermark, but you need to completely turn off the Timestamp for this. Could anyone please confirm there's no way to turn off the watermark on this device?

The logo watermark can also be set to off in the DDPAI APP.

 

[ced57]

After a few weeks of use I am really happy with this z60 pro As an improvement, it would be nice to have the possibility of setting a delay before putting into parking mode in order to have time to close the door without triggering a collision alert when we are in very sensitive detection.

 

[intothedragon]

The logo watermark can also be set to off in the DDPAI APP.

No, there's no option to turn off the logo watermark available in the app. The only available buttons are to turn off Timestamp and another one to turn off Speed. Could you please tell me how to turn off the logo watermark?

 

[helg]

The 4G box uses Quectel EC200A-EL LTE Cat4 modem, which BTW does not support GSM/GPRS.
Is there some connection schematics available, before i start cutting the USB-C cables ?
I bought the box at amazon and it came with the austrian A1 sim card, but i have no idea how to activate it 😉

 

[linuxliu]

The 4G box uses Quectel EC200A-EL LTE Cat4 modem, which BTW does not support GSM/GPRS.
Is there some connection schematics available, before i start cutting the USB-C cables ?
I bought the box at amazon and it came with the austrian A1 sim card, but i have no idea how to activate it 😉

Please refer to the diagram in the attachment for connection. Once connected, the device will give a voice prompt when the 4G connection is successful. Then, you just need to bind the recorder device with the mobile phone APP.