Ragnarok1983
New Member
Hi all,
I am having issue with Viofo HK3 not cutting off. Have wired it up as per diagram, except I added a manual BATT power cut off (just in case if i want to disable parking mode completely)
With the multi meter, i have confirmed the Battery, ACC terminals in the fuse box and got fuse taps installed and wiring soldered to HK3 tails.
My only concern is about the HK3 cut off value. I have set it to 12.4V cut off on switch, but it does not cut off when battery is at 12.2V (measured from fuse tap). Possibly it may cut off when the battery is drained to lower voltage, but i dont want to take that chance.
Anyone else had experience with this? Possible mismatch between cut off value on switch and actual cut off in operation?
I am having issue with Viofo HK3 not cutting off. Have wired it up as per diagram, except I added a manual BATT power cut off (just in case if i want to disable parking mode completely)
With the multi meter, i have confirmed the Battery, ACC terminals in the fuse box and got fuse taps installed and wiring soldered to HK3 tails.
My only concern is about the HK3 cut off value. I have set it to 12.4V cut off on switch, but it does not cut off when battery is at 12.2V (measured from fuse tap). Possibly it may cut off when the battery is drained to lower voltage, but i dont want to take that chance.
Anyone else had experience with this? Possible mismatch between cut off value on switch and actual cut off in operation?