E1 Pro Test & Review PP

Chuck McCoy

Well-Known Member
Joined
Jun 9, 2022
Messages
4,270
Reaction score
4,322
Location
California
Country
United States
Dash Cam
2025 Minimum Requirements: STARVIS 2 & HDR (death to 1080p)
Test unit provided by Vantrue, (thank you very much).
The Vanture E1 Pro was released January 2025, so why am I testing it 9 months late?
After testing the original Vantrue E1 (IMX335) August 2022 I saw some of the same things with the E1 Pro that caused me to discontinue testing, and send the original E1 back to Vantrue.
Well what a difference a day makes.
October 20, 2025 Viofo released the A119M Pro.
I find it extremely difficult to near impossible to evaluate image quality unless I compare it to another camera.
E1 Pro is the "closest” single channel competitor to A119M Pro.
Both are budget models.
Both 4K STARVIS 2 (IMX678).
Both “mini” but the E1 is definitely cuter. lol
This should be an interesting comparison because E1 Pro has been out for 9 months, and should have fully finished “polished” firmware, and A119M Pro is “brand new”.
What an exiting time to be alive.

1.) E1 Pro Fun Pack .webp


SPECIFICATIONS:
Processor: Novatek 98528
STARVIS 2 (IMX678) 4K30fps
HDR Support: Yes
Exclusive PlatePix™ Technology
Compatible with LTE Module
Lens Aperture: F1.8
FOV: 158°
Firmware Delivered: VT-EEH111 (10/21/25)
Current Firmware: VT-EEJ151 (10/21/25)
I tried OTA Firmware update, did not work, had to use “old” SD Card method.
Maximum Bitrate: 32 Mbps
1 Minute File Size: 232MB
CPL Filter: 40mm CPL Filter Included
LCD Display: 1.5” inch
Electronic Fence Support: Yes (not sure what this is maybe GeoFence for parking mode?)
Voice Commands: Yes
Video Codec: H.264
Format: MP4
Super Capacitor (no lithium battery)
Operating Temperature: -4℉ to 140℉ (-20℃ to 60℃)
LED Status Light: Blinking Green Record LED
Wireless Remote: Yes (optional accessory)
Optional Suction Cup Mount: Yes
Dual-System GPS: Yes
Audio Noise Reduction: Yes
Loop Record: Off, 1/2/3 Minutes
Max SD Card: 1TB Vantrue Brand
Wi-Fi 5: Dual Band 2.4GHz & 5GHz
Wi-Fi Transfer Speed: TBA
Parking Modes: Buffered Motion Detection, Collision Detection, Low Bitrates Recording, Low Frame Rate Recording
Mileage Statistics Support: Yes
OTA Firmware Updates: Yes
Official Release: January 2025
Warranty: 12 Month standard, 18 Month with product registration
FCC ID: 2A7EH-E1PRO (January 1, 2025); https://fcc.report/FCC-ID/2A7EH-E1PRO/

Q&A:

Q: What is the heat signature difference measured with Thermal Imaging Camera between A119M Pro, and Vanture E1 Pro in normal / driving recording mode?
A: TBA

Up next is Horizontal FOV measurements.
 

Attachments

  • User Manual Specifications .webp
    User Manual Specifications .webp
    144.1 KB · Views: 7
  • 1 Minute File = 232MB  .webp
    1 Minute File = 232MB .webp
    19.1 KB · Views: 8
  • VT-EEJ151 October 21, 2025 .webp
    VT-EEJ151 October 21, 2025 .webp
    21.4 KB · Views: 9
  • Delivered With Camera VT-EEH111 .webp
    Delivered With Camera VT-EEH111 .webp
    21.2 KB · Views: 7
Last edited:
Q: What is the Measured Horizontal FOV of E1 Pro, and how does it compare to Viofo A119M Pro?
A:

112.26° = E1 Pro
112.26° = A119M Pro

E1 Pro .webp

A119M Pro .webp
 

Attachments

  • Test Rig 1 .webp
    Test Rig 1 .webp
    173.6 KB · Views: 3
  • Firmware .webp
    Firmware .webp
    49.1 KB · Views: 3
  • VT-EEJ151 October 21, 2025 .webp
    VT-EEJ151 October 21, 2025 .webp
    21.4 KB · Views: 3
  • Test Rig 2 .webp
    Test Rig 2 .webp
    160.2 KB · Views: 3
E1 Pro vs. A119M Pro
NORMAL / DRIVING MODE - POWER CONSUMPTION & HEAT COMPARISON

Q: What is the difference between E1 Pro vs. A119M Pro in power consumption, and heat signature in Normal / Driving Recording Mode.
A: See Below

SETTINGS:

E1 Pro
Firmware: VT-EEJ151
1TB Vantrue SD Card
Wi-Fi: Off
LCD Screen: Off
Bitrate: Maximum
HDR: On
PlatePix: On
Loop Record: 1 Minute

A119M Pro
Firmware: V1.0 20251009
512GB Viofo SD Card
Wi-Fi: Off
LCD Screen: Off
Bitrate: Maximum
HDR: On
Loop Record: 1 Minute

1.) Test Configuration .webp


I let the both cameras operate in normal / driving recording mode for 1 hour.
I used the MIN / MAX / AVG function on my Fluke 115 & 117 to get the average amperage / current draw.

POWER CONSUMPTION:
368mA x 12.6V = 4.6 Watts (E1 Pro)
336mA x 12.6V = 4.2 Watts (A119M Pro)
0.4 Watts More E1 Pro

3.) 368mA x 12.6V = 4.6 Watts (E1 Pro) .webp

2.) 336mA x 12.6V = 4.2 Watts (A119M Pro) .webp


HEAT SIGNATURE (highest observed temperature)
Garage Ambient Temperature 72℉ (22℃)
171℉ (77℃) E1 Pro
176℉ (80℃) A119M Pro
5℉ (3℃) A119M Pro Hotter

4.) E1 Pro Front .webp
1.) A119M Pro Front .webp

5.) E1 Pro Left .webp
2.) A119M Pro Right  .webp

6.) E1 Pro Right .webp
3.) A119M Pro Left  .webp
 
A119M Pro vs. E1 Pro
NORMAL / DRIVING MODE - POWER CONSUMPTION & HEAT COMPARISON

Q: What is the difference between A119M Pro vs. E1 Pro in power consumption, and heat signature in Normal / Driving Recording Mode.
A: See Below

SETTINGS:

A119M Pro
Firmware: V1.0 20251009
512GB Viofo SD Card
Wi-Fi: Off
LCD Screen: Off
Bitrate: Maximum
HDR: On
Loop Record: 1 Minute

E1 Pro
Firmware: VT-EEJ151
1TB Vantrue SD Card
Wi-Fi: On (default setting)
LCD Screen: On (default setting)
Bitrate: Maximum
HDR: On
PlatePix: On
Loop Record: 1 Minute

1.) Test Configuration .webp


I let the both cameras operate in normal / driving recording mode for 1 hour.
I used the MIN / MAX / AVG function on my Fluke 115 & 117 to get the average amperage / current draw.

POWER CONSUMPTION:
317mA x 12.6V = 4.0 Watts (A119M Pro)
398mA x 12.6V = 5.0 Watts (E1 Pro)
1.0 Watt More E1 Pro

317mA x 12.6V = 4.0 Watts (A119M Pro) .webp

398mA x 12.6V = 5.0 Watts (E1 Pro) .webp


HEAT SIGNATURE (highest observed temperature)
Garage Ambient Temperature 66℉ (19℃)
145℉ (63℃) A119M Pro
170℉ (77℃) E1 Pro
25℉ (14℃) E1 Pro Hotter

A119M Pro Front .webp
E1 Pro Front .webp

A119M Pro Right .webp
E1 Pro Left .webp

A119M Pro Left .webp
E1 Pro Right .webp
 
Last edited:
Back
Top