[Guide - Easy]Custom Firmware Release YI Dash Cam "CA" Serial. -No need Serial change anymore

WARNING! MAKING CHANGES TO YOUR FIRMWARE ARE PERFORMED AT YOUR OWN RISK. WE ARE NOT RESPONSIBLE FOR ANY DAMAGE TO YOUR DASH CAM AS A RESULT OF THESE INSTRUCTIONS.

As i am Korean, so i am not good at English. please understand.

It's only CN serial version user guide

Easy to use.

Don't Change Serial anymore.
Just Check your chinese dashcam serial and flash custom firmware.

Don't forget this. never change serial. just flash custom firmware your CN dashcam.

Country code is "CN" firmware but this firmware language "US"

1st Group Custom Firmware : Download
[CA21L - CA21W - CA18L - CA21B]

2nd Group Custom Firmware : Download
[CABAA - CA31A]

  1. Download your dashcam serial group file into your SD card and add the .bin extension to the end
  2. Insert this card back into your card and power it on again using the power cable
  3. Your camera should start updating your camera, once finished, accept all prompts.
  4. Format your card and you are finished
please don't upload another site.
i uploaded dashcamtalk only.



Have a good day.

[Korean Xiaomi Story Cafe User Only]
if your Xiaomi Story Cafe User..
This forum can not be written in Korean.
See the article on that Xiaomi Story.

http://cafe.naver.com/xst/153618 Part.0
http://cafe.naver.com/xst/153676 Part.1
its me. AppleHolic. ^^


Release Date
-----------------
2017-01-26
- 1.03.27-CN firmware release language US.

Dear AppleHolic,

I would like to build a custom firmware for YI Dashcam where we can change the Wifi mode from AP to client. Can you help me?

Thanks

Max Malta
Brazil
 
Усім привіт! Допоможіть, будь ласка, я спробував переінсталювати його китайською та англійською мовами, але все ще існує проблема з помилкою адаптації системи Lenguage
 
My device's brick after upgrade firmware CN to US (modify SN).
CA40ABCNCR2038D5C267
ID: 2016DP0314
Help me please.
 
My device's brick after upgrade firmware CN to US (modify SN).
CA40ABCNCR2038D5C267
ID: 2016DP0314
Help me please.
==> I have fixed my device. It's work!
 
My device's brick after upgrade firmware CN to US (modify SN).
CA40ABCNCR2038D5C267
ID: 2016DP0314
Help me please.
==> I have fixed my device. It's work!

Fix errors:
1. Change SN number (only change SN number): https://dashcamtalk.com/forum/threads/fix-invalid-sn-language-adaptation-error-pink-screen.28038/
2. Turn off dash cam
3. Download firmware.bin: https://drive.google.com/file/d/1tWFhZg8mctzCGQUOJrO5TDpReTe2ZgST/view?usp=sharing
- Copy file firmware.bin to SD card. Insert SD card to dash cam. Turn on dash cam and wait... done.
- Turn off dash cam.
- Open SD card, delete file firmware.bin
4. Download FWCARC10.bin: https://drive.google.com/file/d/1bSFuP_8pIdQK8U6BP0GPYflo91YWvy33/view?usp=sharing
- Copy file FWCARC10.bin to SD card. Insert SD card to dash cam. Turn on dash cam and wait... done.
Good lucks.
 
Back
Top