John Edgington
New Member
- Joined
- Jul 14, 2017
- Messages
- 11
- Reaction score
- 1
- Country
- United Kingdom
I have managed to get the WR1 to talk to my Samsung via the built in wi-fi and I can see what it sees on my phone, so far so good.
I have used the in camera format process and it does that almost instantaneously so I assume its formatted, the card is a brand new 64g Lexar.
I have downloaded the update onto my pc as instructed below. I then plug the camera into the PC via the small lead and I am then supposed to copy the file thus
Help please
I have used the in camera format process and it does that almost instantaneously so I assume its formatted, the card is a brand new 64g Lexar.
I have downloaded the update onto my pc as instructed below. I then plug the camera into the PC via the small lead and I am then supposed to copy the file thus
- Use Micro SD card formatted by camera or on computer as FAT32
- Insert card in camera and connect it to computer using USB cable
- Copy just the FWWR1.bin on the root of the card
- After FWWR1.bin is copied to the card disconnect the camera from computer
- Reconnect the camera to your computer and wait few seconds until the camera is powered on.
Help please