efusco
New Member
- Joined
- Nov 30, 2017
- Messages
- 3
- Reaction score
- 0
- Country
- United States
Have had my BV installed for about 3 years and it has worked ok (other than the corrupted SD card issues every 6 months or so). I just installed a new SD card (SanDisk High Endurance 32GB) after my old one finally fried. New card seemed to work OK for a couple of days, then after a couple weeks it occurred to me that I had not been hearing the beeps on hard corners and such that I usually did.
The Blue power light stayed on, but when I tried a reformat in the camera (holding the button down), it didn't speak "Reformating the SD card" or beep or anything. I unplugged, plugged back in, tried the button again, etc. Finally tonight I took out the SD card and reformatted it with the BV software on my PC, reinstalled and nothing. Blue light is still on. The camera gets warm (though maybe not as hot as it usually does), can't get the wifi to turn on to connect to my phone, no voice, no beeps, nothing.
Is she dead, Jim? Is there more troubleshooting I can/should try?
The Blue power light stayed on, but when I tried a reformat in the camera (holding the button down), it didn't speak "Reformating the SD card" or beep or anything. I unplugged, plugged back in, tried the button again, etc. Finally tonight I took out the SD card and reformatted it with the BV software on my PC, reinstalled and nothing. Blue light is still on. The camera gets warm (though maybe not as hot as it usually does), can't get the wifi to turn on to connect to my phone, no voice, no beeps, nothing.
Is she dead, Jim? Is there more troubleshooting I can/should try?