Friends! Please, HELP!
I have bought the car DVR Jooyfact A1 based on Novatek 96658 chipset here: https://ru.aliexpress.com/item/32763004814.html
There are several problems after installation into the car:
I have bought the car DVR Jooyfact A1 based on Novatek 96658 chipset here: https://ru.aliexpress.com/item/32763004814.html
There are several problems after installation into the car:
- after turning the device on it blinks once with the blue light after this it blinks only with the red. I have recordered the video telling how it is working. Here it is:
- the seller recommends to use only specific tf-cards: “Use SanDisk or Toshiba, C10 , FAT32 , 98M/S or Above TF card”. No problem, I have bought relevant sandisk tf-card. But still the same result.
- the seller send me the UPDATING firmware (not the FULL one). Following up on his recommendations I tried to flashes the firmware update of the dvr. SanDisk, C10 , FAT32 , 98M/S used during this process. But still no result. It flashes for several seconds: red and blue lights bleems simultaneously. AND AFTER THIS ONLY RED LIGHT BLEEMS. i am waiting for 5 mins but nothing changes - device does not working! Here is the video of the flashing: https://www.youtube.com/watch?v=BznH...46693e5f9YtgR3
- my microelectronics technician says that the only way to solve the problem is to flash THE FULL firmware with the help of the programmer. But the seller did not have this one.